3 amps on 120 volts is almost 1/2 hp. To be exact 0.48 hp, that's why I said almost 0.5 hp or 1/2 hp.
So say you are thinking of buying a 3 amp grinder or table top sander and you want to know about how many HP (Horse Power) it is, the answer is 120 volts X 3 amps = 360 X 0.00134 = 0.4824 HP which is almost a 1/2 HP
you can do the math from there if its a 6 amp motor then its almost a 1 HP motor or to be exact 0.4824 X 2 = 0.9648 also almost 1 HP. This is if you are on 120 volts. If you are on 110 or 125 volts its about the same.
3 horse power if it is 3phase system then it will draw apx.4.5 amps if supply voltage is 440 volts ,at frequency 50 cps. the current needed depends up on supply system parameters.
To answer this question a voltage is needed.
3 amps
For a single phase 3 HP motor at 208 volts the amperage is 18.7 amps. For a three phase 3 HP motor at 208 volts the amperage is 10.5 amps. This figure is derived at by taking the full load amps at 230 volts and adding 10%. As the voltage goes down the amperage goes up. For 200 volt motors 15% is added to the FLA of a 230 volt motor.
about 3 or 4
100 amps
8,33 Amps
3 things Volts, ohms, and amps
3 amps
It uses 2 amps
3/0 gauge
For a single phase 3 HP motor at 208 volts the amperage is 18.7 amps. For a three phase 3 HP motor at 208 volts the amperage is 10.5 amps. This figure is derived at by taking the full load amps at 230 volts and adding 10%. As the voltage goes down the amperage goes up. For 200 volt motors 15% is added to the FLA of a 230 volt motor.
60 amps
106 amps
about 3 or 4
The main breaker is not based on the HP of the motor it is based on the FLA of the motor. Many different motors have different characteristics and all of the different motors have different amperages Once you have the amperage of the motor the breaker is 250% times the FLA of the motor.
100 amps
8,33 Amps
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan