0
In electricity what a dash line running between various switches and outlets indicates?
Wiki User
∙ 14y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the difference between Weighted distribution and Numeric distribution?
ND measures the number of outlets per total number of outlets from the specific market, while WD measures how much the outlet sells of the total volume.
Distinguish between selective distribution and exclusive distribution?
Selective distribution involves a producer using a limited number of outlets in a geographical area to sell products. An advantage of this approach is that the producer can choose the most appropriate or best-performing outlets and focus effort (e.g. training) on them. Selective distribution works best when consumers are prepared to "shop around" - in other words - they have a preference for a particular brand or price and will search out the outlets that supply.Exclusive distribution is an extreme form of selective distribution in which only one wholesaler, retailer or distributor is used in a specific geographical area.
Why the power outlets in your endeavor 06 don't work?
Check the fuse.Check the fuse.
How do you increase numeric distribution?
•Explanation: Mathematical Teamnumeric distribution is the number of outlets in a given marketplace who carry or sell a particular brand, divided by the total number of outlets in the marketplace.•For example if there are ten Clothing, and three sell Levis the numeric distribution would be 30% or 10% per outlet.
Where can one buy a pair of orthaheels?
Orthaheel shoes can be found at the online specialty retailers Zappos, Scholl's, and Orthaheel as well as at specially selected outlets across the country.
Are there outlets on electricity poles?
No.
Where does the electricity in the outlets come from?
It comes from the cable.
Can you tie into a 3-way switch at the end of the run and add additional outlets?
If I am reading your question right, you can do this. Just parallel the outlets to the device already switched by the 3-way switches. The outlets will turn off and on by the switches. Watch that you do not overload the switches or the circuit.
What are the different types of wall switch plates?
The types of wall switch plates vary. Some are strictly switches to turn on and off the electricity circuit. Other switch plates have, in addition, are designed to fit over electrical outlets with openings for them.
Find out what wires do?
Wires just connect electricity cords/outlets.
Do stereo speakers use electricity to operate?
yes, they are plugged into outlets
Can you use 10 3 wire for outlets and lights in a home?
You could but is it a total waste of money and is overkill. Use 12/2 with ground on all 120 volt outlets and light switches.
how to tile around sockets and light switches?
Tiling around sockets and light switches can be a bit tricky, but with careful planning and attention to detail, you can achieve a professional-looking result. Here's a step-by-step guide to help you tile around sockets and light switches Materials and Tools: Tiles Tile adhesive Tile spacers Tile cutter or wet saw Tile nippers Notched trowel Level Pencil Measuring tape Screwdriver Outlet extenders (if needed) Steps Turn off the Power Before you start, turn off the power to the area where you'll be working. This ensures your safety when dealing with electrical outlets and switches. Remove Outlet and Switch Covers Use a screwdriver to remove the cover plates from the outlets and switches. Prepare the Wall Ensure the wall surface is clean, smooth, and dry. If necessary, patch any holes or imperfections in the wall. Plan the Tile Layout Plan the layout of your tiles, taking into account the position of the outlets and switches. Use a level to draw a reference line to guide your tile installation. Cut Tiles to Fit Measure and mark the tiles for cutting around the outlets and switches. A tile cutter or wet saw can be used for straight cuts, while tile nippers can be used for more precise cuts. Apply Tile Adhesive Use a notched trowel to apply tile adhesive to a small section of the wall. Press the tiles into the adhesive, leaving space for the outlets and switches. Insert Tile Spacers: Insert tile spacers between the tiles to maintain even gaps for grout. Ensure that the tiles are level as you work. Cut Openings for Outlets and Switches Place the tiles around the outlets and switches, leaving a small gap for expansion. Use a tile saw or nippers to carefully cut out the openings for the outlets and switches. Tile Around Outlets and Switches Continue tiling around the outlets and switches, adjusting the tile layout as needed. Be precise in your cuts to achieve a clean and professional appearance. Allow Adhesive to Dry Allow the adhesive to dry according to the manufacturer's instructions before proceeding. Grout the Tiles: Once the adhesive is dry, remove the tile spacers and apply grout between the tiles. Wipe away excess grout with a damp sponge. Reinstall Outlet and Switch Covers: After the grout has cured, reinstall the outlet and switch covers. Seal the Grout (Optional): Consider applying a grout sealer to protect the grout lines from moisture and stains. By following these steps, you can achieve a professional-looking tile installation around outlets and switches. Remember to work carefully and take your time to ensure a precise and visually appealing result.
Where would you find series circuits?
-- Older/cheap Christmas lights.-- Switches for lights and other household appliances, but not the household outlets.
The abbreviations COALR stands for?
Copper Aluminum Revised. These letters will appear on switches and electrical outlets where Aluminum wiring has been installed.
electrical outlet installation?
form_title=electrical outlet installation form_header=9423 Which services are you in need of? (Choose all that apply)*= [] "Repair or replace an old switch, fixture or outlet [] Install new switches, fixtures or outlets [] Troubleshoot an electrical problem [] Move switches, fixtures or outlets" Please describe the electrical fixtures that are included in this project (please select all that apply)*= [] Ceiling fan or chandelier [] Switches [] Interior lights [] Outlets [] Exterior lights [] Other fixtures [] Bath or attic exhaust fan Please describe this location.*= () Home/Residence () Business
What is different between electronics and electrical?
Electronics involves the behaviors of various components and their interactions to make a desired device or system (e.g. radio, TV, computer...).Electrical involves just power wiring, switches, outlets, lighting, etc.
