Level with the bottom of the fluid's meniscus
It depends on the shape. The volume of a sphere will increase differently to the volume of a cylinder, for example.
If the volume is reduced, and all else remains the same, then the pressure will increase by a factor of 2, or it will double.
it will increase more if you double the radius because the dimensions multiply and the curved surface has less area to cover as its height decreases and width increases
Double its height or increase its radius by a factor of sqrt(2) = 1.4142 (approx) or some combination of changes to he height and radius.
6 cu.ml
Because sand have also a volume.
decreased
You should read a graduated cylinder at eye level. See the related link for rules regarding menisci.
They have a reflective layer at the back of the eye - intended to increase the effectiveness of their night-vision.
No
it is covering outside the cylinder of an engine. it is added to the cylinder head and walls in order to increase the surface area that can radiate the heat to the air pgassing by.
Enlarging the cylinder bore will increase cc's in a 2 stroke and ci's ina 4 stroke.....
g force chip
Because of the Brownian motion inside the water.
Level with the bottom of the fluid's meniscus
Water in a glass graduated cylinder adheres to the sides of the cylinder, forming a meniscus which is an upward curve. When reading volume in a cylinder, look at the meniscus at eye level. Read the volume at the bottom of the curve.