answersLogoWhite

0

2/100 is less than 5/100. When in doubt multiply both by the greatest decimal place. Ex. these both happened to be hundredths. If you had .2 and .05 you would multiply both by 100 leaving 20/100 and 5/100. I hope this makes sense.

User Avatar

Kathy McGuire

Lvl 2
4y ago

What else can I help you with?

Related Questions

What number is greater 005 or 009?

009 (9) is greater than 005 (5) by 004 (4)


Valve clearance on Briggs straton 18.5hp engine?

.002-.005 intake and, .005-.007 exhaust


How many 3 digit numbers have the sum of their digits equal to 5?

002+002+001=005


What fit is recomnded to the ball bearings on the shafts?

It depends on the application of the bearings. If inside a gearbox for example, the best fit would be a press fit of .002, meaning the shaft diameter is .002 smaller than the bearings inside diameter (ID). For other applications where spinning of a bearing on a shaft is of less concern, then a slip fit of .005 or greater is fine as long as the bearing doesn't rock back and forth on the shaft.


Is .005 less than .0065?

Yes: 0.005 < 0.0065


Is .005 larger than .05?

hundredths or thousandths which is greater?


What is thicker 003 or 005?

005 is thicker than 003


How do you know if 003 is smaller than 005?

To determine if 003 is smaller than 005, you can compare the numbers by their value. Both are three-digit numbers, but when considering their actual values, 003 is equivalent to 3, and 005 is equivalent to 5. Since 3 is less than 5, it follows that 003 is indeed smaller than 005.


What is greater 4.905 or 4.9?

Although the numbers are close 4.905 is actually greater than 4.9 by .005. 4.905 - 4.900 --------- 0.005


What is greater .725 or .73?

.73 (by.005)


Which is greater .050 or .005?

The 1st decimal number is the greater


Valve clearance 2002 xr50?

the valve clearance should be set at .002 for the intake and the exhaust