256 round to the nearest hundred
First, you must convert this measurement into inches. 34' = 34 feet (12 inches/1 foot)= 408 inches 408 inches + 5 inches = 413 inches 1 inch = 2.54 centimeters 413 inches (2.54 cm/1 inch) = 1049.02 cm
1237 inches is 103 feet and 1 inch 103 feet is 34 yards and 1 foot, Hence 1237 inches is 34 yards, 1 foot and 1 inch
The conversion is: 1 inch = 25,4 mmSo 34 inches is equal to 863,6 mm.
There are 2.54 centimeters in one inch. So take your measurement in inches and multiply it by 2.54 to change the unit to centimeters. In this case, the answer is 87.63 centimeters. Algebraic Steps / Dimensional Analysis Formula 34.5 in* 2.54 cm 1 in = 87.63 cm
It is between 1 inch and 1.5 inches, but closer to the 1.5 inch mark. It is essentially just short of the 1and 7/16 inch mark
Two inches is 1,000 miles and 34 inches is 17,000 miles.
To find 0.166 inches on a ruler, locate the 1/8-inch mark, which is 0.125 inches. Then, estimate a little less than halfway between the 1/8-inch mark and the 1/4-inch mark (0.25 inches). The 0.166 inches is slightly closer to the 1/8-inch mark than to the 1/4-inch mark.
Not very. Half an inch is 0.5 inches. 0.197in is far closer to 1/5 or 0.2 of an inch
To find out what 1 inch on the map equals in miles, you can set up a proportion: 34 inches -> 750 miles 1 inch -> x miles Cross multiplying gives you: 34x = 750. Solving for x, you get x = 750 / 34 ≈ 22.06 miles.
2.54 cm to an inch (to 3 significant figures) 0.39370078740157477 inches to a cm
1.18 inches on a tape measure is slightly more than 1 inch but less than 1.25 inches. It falls between the 1-inch mark and the 1 and 1/4-inch mark. To visualize it, you can count the small increments on the tape measure, where 1.18 inches is just past the 1-inch mark, closer to the 1 and 1/5-inch mark.
1 inch = 25.4 millimeters34 millimeters = (34 / 25.4) = 1.339 inches (rounded)Direct Conversion Formula34 mm*1 in25.4 mm=1.338582677in