No. Mils are much smaller than mms.
Wiki User
∙ 12y ago1 mil = 0.0254 millimeters4 mil = 0.1016 millimeters
1.024 mm
0.405 mm
The British one penny is 20.32 mm in diameter with a thickness of 1.52 mm of bronze (if made between 1971 and 1992) and 1.65 mm copper-plated steel (if minted after 1992).The one penny weighs 3.5625 grams. The two pence is 25.9 mm in diameter and if minted before 1992 has a thickness of 1.85 mm (bronze), and if minted after 1992 has a thickness of 2.03 mm (copper-plated steel) and weighs 7.125 grams. The 5 pence is 18 mm in diameter and has a thickness of 1.7 mm or 1.89 mm and weighs 3.25 grams. The ten pence has a diameter of 24.5 mm with a thickness of either 1.85 mm or 2.05 mm and a weight of 6.5 grams. The twenty pence has a diameter of 21.4 mm and a thickness of 1.7 mm. The twenty pence weighs 5 grams. The 25 pence has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams. The 50 pence has a diameter of 27.3 mm, a thickness of 1.78 mm, and weighs 8 grams. The one pound coin has a diameter of 22.5 mm, a thickness of 3.15 mm, and weighs 9.5 grams. The two pound coin has a diameter of 28.4 mm, a thickness of 2.5 mm, and weighs 12 grams. The five pound coin has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams.
1 mm is the thickness of a dime. 1cm is 10 mm
A mil is a unit of measurement that is utilized to describe and measure thickness in different materials like plastics. Since 1 mil is equal to 0.001 in or 0.0254 mm, then 10 mil of vinyl is 0.01 in, or 0.254 mm of thick.
A mil is a unit of measurement that is utilized to describe and measure thickness in different materials like plastics. Since 1 mil is equal to 0.001 in or 0.0254 mm, then 10 mil of vinyl is 0.01 in, or 0.254 mm of thick.
Assuming the two are measurements of thickness, it should be obvious that 30 mm is thicker!
30-40mm.
the yield strength of Q345B is 345MPa for thicknesses <= 16 mm. 325MPa for 16 mm < thickness <= 35 mm. 295MPa for 35 mm < thickness <= 50 mm. 275MPa for 50 mm < thickness <= 100 mm.
the yield strength of Q345B is 345MPa for thicknesses <= 16 mm. 325MPa for 16 mm < thickness <= 35 mm. 295MPa for 35 mm < thickness <= 50 mm. 275MPa for 50 mm < thickness <= 100 mm.
1 mil = 0.0254 millimeters4 mil = 0.1016 millimeters
the yield strength of Q345B is 345MPa for thicknesses <= 16 mm. 325MPa for 16 mm < thickness <= 35 mm. 295MPa for 35 mm < thickness <= 50 mm. 275MPa for 50 mm < thickness <= 100 mm.
0.0508 mm
1.024 mm
0.405 mm
The thickness of the US quarter is 1.75 mm