answersLogoWhite

0

0.405 mm

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Math & Arithmetic

What is 18 gauge in mm thickness?

1.024 mm


In mm how thick is 26 gauge silver?

0.405 mm.


How many mm is 16 gauge PVC?

16 gauge PVC has a thickness of approximately 1.29 mm. The gauge system varies by material type, but for PVC, 16 gauge typically corresponds to this measurement. It's important to verify specifications with the manufacturer, as tolerances can vary slightly.


What is 26 gauge in inches?

26 gauge refers to a measurement used to specify the thickness of materials, particularly in metals. In inches, 26 gauge is approximately 0.0179 inches thick. This gauge is commonly used in applications such as sheet metal fabrication and wire production.


What are the dimensions of British currency?

The British one penny is 20.32 mm in diameter with a thickness of 1.52 mm of bronze (if made between 1971 and 1992) and 1.65 mm copper-plated steel (if minted after 1992).The one penny weighs 3.5625 grams. The two pence is 25.9 mm in diameter and if minted before 1992 has a thickness of 1.85 mm (bronze), and if minted after 1992 has a thickness of 2.03 mm (copper-plated steel) and weighs 7.125 grams. The 5 pence is 18 mm in diameter and has a thickness of 1.7 mm or 1.89 mm and weighs 3.25 grams. The ten pence has a diameter of 24.5 mm with a thickness of either 1.85 mm or 2.05 mm and a weight of 6.5 grams. The twenty pence has a diameter of 21.4 mm and a thickness of 1.7 mm. The twenty pence weighs 5 grams. The 25 pence has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams. The 50 pence has a diameter of 27.3 mm, a thickness of 1.78 mm, and weighs 8 grams. The one pound coin has a diameter of 22.5 mm, a thickness of 3.15 mm, and weighs 9.5 grams. The two pound coin has a diameter of 28.4 mm, a thickness of 2.5 mm, and weighs 12 grams. The five pound coin has a diameter of 38.61 mm, a thickness of 2.89 mm, and weighs 28.28 grams.

Related Questions

If sheet thickness is .5 mm what is the gauge?

Probably 25 gauge, which is .556 mm thick. However, 26 gauge is close too, it is .478 mm thick.


What is 9 gauge in mm thickness?

what is 9gauge in mm thickness


What is 18 gauge in mm thickness?

1.024 mm


What thickness in mm is 200 gauge?

0.0508 mm


What is 20 gauge in mm thickness?

.953 mm (USG)


How many mm thickness is 12 gauge steel?

12 gauge is thicker than 14 gauge.


What thickness is 18 gauge steel in mm?

1.27 mm (USG)


What is the Relation between sheet metal gauge and thickness?

Metal gauge is inversely proportional to thickness, the bigger the thickness lesser the gauge. Following is conversion table:- 10 G : 3.15 MM 11 G : 2.8 MM 12 G : 2.5 MM etc....


What gauge thickness is 18 of an inch?

1.27 mm


What is 16 gauge in mm thickness?

In Imperial standard (swg), 16 g is 0.064" (1.63mm) thick.


What gauge is 0.09 mm thick vinyl?

A vinyl thickness of 0.09 mm is approximately 3.54 mils, as 1 mil equals 0.001 inches or 25.4 micrometers. In terms of gauge, this thickness is roughly equivalent to 26 gauge, as there are different standards for gauge measurements depending on the material. However, it's important to note that gauge measurements can vary by industry and material type.


100 gauge polythene thickness means how many thicness in mm?

ANSWERIn the case of polythene, gauge can be converted to thickness by dividing by four to get the thickness in micron or dividing by 4000 to get the thickness in mm. Here are some common examples:100 gauge = 25 micron = 0.025mm120 gauge = 30 micron = 0.03mm200 gauge = 50 micron = 0.05mm250 gauge = 62.5 micron = 0.0625mm400 gauge = 100 micron = 0.1mm