In the CEC only 1/0 and larger conductors can be run in parallel.
Ground is sized based on the size of the feeder wire and not the amps of the service! However, for a 600 amp service 1500MCM copper wire is one option (NEC 310.16) ;therefor, ground wire is 3/O copper (NEC 250.66) or another option is a two sets of 350 MCM copper wire then a #2 copper (since the biggest feeder wire is 350MCM).
About 1.5 lb per linear foot. A Circular Mil is the area of a circle with a diameter of 1/1000 of an inch. The first "M" actually stands for 1000, and "MCM" is interchangeable with "kCM." 500 MCM has an cross-sectional area of 253.4 sq mm (2.534 sqcm, a density of 8.96 g/cc. 1 foot is 30 cm. 2.534*8.96*30 = 692 g = 1.52 lb. Of course if you're using 500MCM cable you're probably installing it in a 3-phase system, with possibly a full-size neutral, so for total runs, you may have a 3-4 multiplier for a total weight of a single set run.
1/0 copper
350mcm
If you bend 350MCM at a tight 90 degree you will break the internal conductor. You should be able to feel the cable and feel if you are forcing it. It will need room to curve (make a radius) in order to make a transition from vertical to say horizontal. Unfortunately, much of the older cable will be brittle and you may snap the insulation.
Ground is sized based on the size of the feeder wire and not the amps of the service! However, for a 600 amp service 1500MCM copper wire is one option (NEC 310.16) ;therefor, ground wire is 3/O copper (NEC 250.66) or another option is a two sets of 350 MCM copper wire then a #2 copper (since the biggest feeder wire is 350MCM).
Ground is sized based on the size of the feeder wire and not the amps of the service! However, for a 600 amp service 1500MCM copper wire is one option (NEC 310.16) ;therefor, ground wire is 3/O copper (NEC 250.66) or another option is a two sets of 350 MCM copper wire then a #2 copper (since the biggest feeder wire is 350MCM).
About 1.5 lb per linear foot. A Circular Mil is the area of a circle with a diameter of 1/1000 of an inch. The first "M" actually stands for 1000, and "MCM" is interchangeable with "kCM." 500 MCM has an cross-sectional area of 253.4 sq mm (2.534 sqcm, a density of 8.96 g/cc. 1 foot is 30 cm. 2.534*8.96*30 = 692 g = 1.52 lb. Of course if you're using 500MCM cable you're probably installing it in a 3-phase system, with possibly a full-size neutral, so for total runs, you may have a 3-4 multiplier for a total weight of a single set run.