0
No. Per the National Electrical Code, table 310.13, THWN is suitable for dry and wet locations with a maximum operating temperature of 75o C. THWN-2 wire is suitable for dry and wet locations up to 90o C.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What material is used for insulation on the outside of connecting wires?
Cross link polyvinyl chloride RW90 (PVC) and THHN are two common types of insulation THHN wire stands for thermoplastic high heat resistant nylon coated wire. THWN stands for thermoplastic heat- and moisture resistant nylon coated wire.
Can a three way switch be changed to a single pole switch with a plate over one of the switch locations?
Yes, If you only hook up two wire it will work as a single pole
What is the temperature rating of THHN WIRE?
THHN wire is moisture resistant thermoplastic allowed for use in dry and wet locations. Maximum temperature is 60 C or 140 F. Being thermoplastic it should not be handled below 0 C as cracking of the insulation could easily occur.
What gauge wire is needed for 7.5 amps?
AWG # 14 is the smallest wire you can install in a home and it can only be used in living areas. It will carry 15 amps.
Why is stranded wire used?
Multiple stranded cable is used in transmission lines because the high voltage potential of each line causes the electrons to tend to run only on the surface of the line due to repulsion. You want to maximize the surface area of the line, hence the multiple stranded lines, so that you maximize the efficiency of the line. In fact, some transmission lines have a non-conductive core, adding strength while maintaining low weight.
What material is used for insulation on the outside of connecting wires?
Cross link polyvinyl chloride RW90 (PVC) and THHN are two common types of insulation THHN wire stands for thermoplastic high heat resistant nylon coated wire. THWN stands for thermoplastic heat- and moisture resistant nylon coated wire.
What type of wire is used in very high temperature locations such as electric heater assemblies?
Nickel chromium wire with fiberglass insulation is used in very high temperatures.
Measurement method of enameled wire?
Enameled wire is widely used in the electronics industry, but of course it is not only used in the electronics industry
Where can one purchase Oakley half wire glasses?
There are many good locations to purchase Oakley Half wire glasses. One of the most affordable spots is the online website eBay, since they are sold used.
Why are some wire cutters and strippers supposed to be used only on copper wire even though it seems like they could be used with almost any type of wire?
If you tried to cut a wire that is too hard, it will damage the cutters.
What is special about the metal Craig Wire sells?
Craig Wire sells wire and magnetic wire that can be used to make electromagnets. It is special because only certain types of wire are suitable for making electromagnets.
The will measure resistance only?
The ohmmeter is usually used to measure the resistance of a given wire only.
What are the 3 types of locations to consider when choosing a wire?
Dry wet
Where can one find supplies for wire art?
There are numerous retail locations and internet pages where one can find supplies for wire art. Arts and crafts stores such as A.C. Moore or Michaels are examples of such locations.
From where could one purchase welded wire mesh?
One can purchase welded wire mesh at many retail locations throughout the United States. Examples of such locations that offer the product include Home Depot or Lowes.
What is a monoblock?
In reference to a car stereo amplifier it is a term used to descibe an amplifier that that has only a single-channel output, meaning you can only wire a single speaker to it unless you wire multiple speakers in a parallel or series circuit. In reference to a car stereo amplifier it is a term used to descibe an amplifier that that has only a single-channel output, meaning you can only wire a single speaker to it unless you wire multiple speakers in a parallel or series circuit.
What is stirrups in beam?
As it has been explained to me there only purpose is to support and separate the rebars in their respective locations. Other than that, they are doing the same thing as wire mesh... displacing concrete.
