You have a double pole breaker for 240Volt supply. The maximum current is 15 amp.
The panel and breaker have to be of the same manufacturer. This way the breaker will fit into the panel. If the panel has a push in bus bar, the breaker must also be the type to accept the bus bar. If the bus bars in the panel are of the bolt in type then the breaker also has to be a bolt in breaker.
DPDT stands for double pole double throw, basically its a relay that when energized, by what ever is controlling it, it will have 2 sets of non-connected contacts "make connection" at the same time. You would use one where you have 2 separate systems that you want controlled by the same action. That help?
A miniature breaker is just two breaker that fit into one breaker slot. These types of breakers are designed to install the same as a full size breaker. Different types of breakers have different mounting configurations to the panels bus bars so installation instructions are not possible without knowing the make and type.
You can reduce the breaker size because that limits the current that can reach the main panel. There is no safety issue other than the significant danger in an unskilled person changing out a main breaker.
Breaker boxes do not have fuses associated with them unless the main disconnect is independent from the breaker box. If that is the case both fuses have to be the same in the main disconnect that protects the breaker box.
In the US a miniature circuit breaker, sold in a single unit, is about 15$, about the same as a regular breaker. If sold as a double unit, meaning two mini breakers installed into one housing, then it is about 25$.
A pole In a circut breaker refers to the number of circuts it controls, single pole only controls one, double controls 2 at same time
I think you are asking how do you fix or replace one breaker on a double pole breaker? Most if not all double breakers have a connector on the switch so that they both trip at the same time. They are also joined together in the body of the breaker. You have to change both of them. If that's not your question, please explain further.
If the 12,000 BTU A/C only requires 20 amps to run then yes you can use the same 12 gauge wire but you cannot change it to a 15 amp breaker. You will need to install a 20 amp double pole breaker. If it requires more than 20 amps you will have to replace the wiring and breaker.
No tandem breakers are of the same value.
A shanghai is a single, a double, and a triple of the same number in one throw of three darts.
Same as shooting a pistol. Press Y to menu,go to ur grenade,press A and EQUIP. Same for shooting istol.aim then throw.
A double pole single throw switch. used to switch two lines at the same time.
If its the same as a 96, its the top row rt. fuse 15amp. Marty
Tandem breakers, often called split breakers or double breakers, provide two separate circuits in the space of a regular sized breaker opening. Every circuit breaker panel has a limited number of circuit openings available. The problem is that when the openings are all used up and you still need to add another circuit, what do you do? You could change the electrical panel or double up circuits on a breaker, but this could place too much load on a particular circuit. So what then? The answer that many have found is a tandem breaker. This type breaker is the same size as any other breaker, but it has its difference. This breaker sports two smaller breakers built into one regular sized breaker. Each has its own breaker switch and the breaker snaps in just like a regular breaker. With this simple innovation, you can add a circuit and protect the circuit on its own dedicated line.
... fuse.
What power point? Is it a fuse or a breaker, they are not the same. What do you want to know?