No, but it probably is a mistake.
1 foot = 12 inches.So, in one inch = 1/12 foot.
There are no feet in an inch, but 12 inches in a foot. In an inch, there are .083 feet.
Foot
Twelve inches are in one foot so yes, an inch is smaller than a foot.
In word form, one twelfth of a foot is one inch.
No you can not but you can use a long shaft on a 16 inch transom
Click the link.
The USCG, ABYC, Canadian and ISO rules all use the same formulas for horsepower for outboard powered boats under 20 feet (6 meter) based on center line length, transom width and transom height.see chart belowTaken from Title 33 Code of Federal Regulations Subpart 183.53Outboard Horsepower CapacityCompute the Factor = Boat Length x Transom width If Factor is (to the nearest integer)0-3536-3940-4243-4546-52Horsepower is357.51015Note: For flat bottom hard chine boats, with a factor of 52 or less reduce HP one capacity increment If the Factor is over 52.5 and the boat hasRemote Steering and at least 20" Transom HeightHP =(2 x Factor) -90No remote steering or less than 20" transom HeightFor flat bottom hard chine boatsHP =(0.5 x Factor) -15For other boatsHP =(0.8 x Factor) -25So if your 14 foot boat is actually 13.83 (13 ft 10in) and has a 4.5 ft transom width the factor will be 62.23. If it has a 20 inch transom height and remote steering then 62.23 X 2 -90 = hp = 34.47 round that to 35.If it has a 15 inch transom and/or tiller steering (the tiller on the motor) then it would be 62.23 x 0.8 -25 = hp = 24.78 round to 25 hp.You have to measure the actual centerline length and transom width. Transom width includes rub rails. (in other words use the widest part of the transom)For more info see the link provided below.in Canada or Europe this would be in meters and kilowatts.
Yes. An inch is a twelfth of a foot. As there are 12 inches to a foot.
1 foot = 12 inches1 foot-pound = 12 inch-pounds
a foot
125 inches = 10.4167 feet 125 inch-pounds = 10.4167 foot-pounds
square feet
1 foot = 12 inches(1 foot) pound = (12 inch) pounds(18 foot) pounds = (18 x 12) = 216 inch pounds
14.751243 Foot-Pounds is equal to 177.014916 Inch-Pounds. 1 Foot-Pound = 12 Inch-Pounds 14.751243 Foot-Pounds * 12 Inch-Pounds = 177.014916 Inch-Pounds.
There 12 inches to a foot, so 120 tenths of an inch to a foot.
12 inch =1 foot