Yes. The related link shows the procedure with pictures. Basically, draw a circle with the compass, then without changing the compass, put the point somewhere on the circle and make a small mark which intersects the circle.
Now put the point at this intersection, and make another mark with the circle. Keep going until you have 6 marks, then take your straight edge and connect the marks.
yes
Measuring implies using a measuring device of some kind. If you mean to construct a hexagon without a protractor or ruler, that's different. Constructions in geometry require only a compass and a straightedge (a ruler, but you ignore the numbers). A hexagon can be made of 6 equilateral triangles; choose any length for the side and construct them connected together, using only the compass to set the length and the straightedge to draw straight lines between points.
A compass and straight edge.
Yes First construct an equilateral triangle: Draw the base side of the triangle and label the ends A and B - this will be the first side of the hexagon. Set the compass to the length of the side. With the compass on one end of the line (point A), draw an arc to one side of the line (roughly near the middle). With the compass on the other end of the line (point B), draw a second arc to intersect the first arc (call this point O) - this is the apex of the triangle. Normally when constructing the triangle side OA and OB would be drawn in, however as a hexagon is being constructed only the location of O is needed. This point O will be the centre of the hexagon. Now construct 4 further equilateral triangles: For the first use OB as the base (the actual line is not needed, just its endpoints), construct its apex C and using the straight edge join B to C. For the next, use OC as the base, construct its apex D and join C to D Then use OD, construct apex E and join D to E Finally using OE, construct apex F and join E to F. The hexagon can now be completed by joining F to A.
You construct a Hexagon by drawing 8 lines that touch each other.
Yes.
yes
Measuring implies using a measuring device of some kind. If you mean to construct a hexagon without a protractor or ruler, that's different. Constructions in geometry require only a compass and a straightedge (a ruler, but you ignore the numbers). A hexagon can be made of 6 equilateral triangles; choose any length for the side and construct them connected together, using only the compass to set the length and the straightedge to draw straight lines between points.
with a compass scribe a circle. then with the compass still set to the same radius place the pin of the compass on the circle and make a mark on the circle. lift the compass, place the pin on the mark and repeat around the circle. the geometry of the circle allows for a hexagon to be generated this way.
A compass and straight edge.
Yes First construct an equilateral triangle: Draw the base side of the triangle and label the ends A and B - this will be the first side of the hexagon. Set the compass to the length of the side. With the compass on one end of the line (point A), draw an arc to one side of the line (roughly near the middle). With the compass on the other end of the line (point B), draw a second arc to intersect the first arc (call this point O) - this is the apex of the triangle. Normally when constructing the triangle side OA and OB would be drawn in, however as a hexagon is being constructed only the location of O is needed. This point O will be the centre of the hexagon. Now construct 4 further equilateral triangles: For the first use OB as the base (the actual line is not needed, just its endpoints), construct its apex C and using the straight edge join B to C. For the next, use OC as the base, construct its apex D and join C to D Then use OD, construct apex E and join D to E Finally using OE, construct apex F and join E to F. The hexagon can now be completed by joining F to A.
You construct a Hexagon by drawing 8 lines that touch each other.
by hands
Yes
No.
Let's say you want to draw a hexagon with each side measuring 2 inches. Take a compass and draw a circle with a radius of 2 inches. With the compass set at the same length (2 inches) start with any point on the circle and measure of 2 inches successively around the circumference of the circle. Join the points with straight lines and you got a hexagon.
A hexagon can be drawn either with a compass or round object, or free hand. A hexagon has six equal sides and six equal angles. For a perfect hexagon, a compass is recommended. * * * * * While a hexagon does have six sides and six vertices, these need not be equal. If the sides are all equal AND the angles are equal, then the hexagon is a regular hexagon.