If you have any question about the functionality of your GFCI, you should have it replaced. You can certainly verify that the GFCI is still functioning by using the test button, but the light gives added assurance that the circuit is functioning properly.
The pilot light in a GFCI is an indication that the receptacle is hot, maybe they should add a red pilot light to indicate that no power is coming out of the outlet and green when power is available.
Disconnect the circuit breaker or fuse to that outlet. Then disable or replace the outlet. This is fairly easy and you can buy a new outlet at a home improvement store for a couple of bucks. If you are not comfortable working with these sorts of things call an electrician.
Could be a loose connection somewhere, or a bad switch, or a bad outlet.
a green light
No, red light is lower frequency than green light.
Check the fuse and horn relay.
The pilot light in a GFCI is an indication that the receptacle is hot, maybe they should add a red pilot light to indicate that no power is coming out of the outlet and green when power is available.
On most surge protectore the green light means it is working. Red light measn it is no longer working.
yes
When you are stopped at a light, and it turns green, you start to drive forward. That is acceleration.
trafic lights where the amber light isn't working
If the left light on your Pintara has stopped working, but the globes and fuses are okay, the wire may have a problem which causes it to lose power. To determine the problem, trace the wire to check for a break.
It means that oncoming traffic is stopped by a red light.
my freezer is working but the fridge stopped the light is out as well. i took thew light out and tried it in the freezer and it worked so i figure it is a fuse i opend up the electrical box on the fridge and not sure witch fuse to pull or if there is another fuse else where
Is the light bulb inside burnt out. If so, that would do it.
A light signal
try a new stop light switch