answersLogoWhite

0


Best Answer

Whether it's large enough or not depends on what you need to do with it.

If you plan to use it to ship water for the population of Las Vegas from Hoover Dam,

then no, it's not large enough to do the job.

If you're going to use it to sip cold sweet tea from the bottom of a tall frosty glass,

then it's much larger than it needs to be for that job.

It all depends on the intended application.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is one and a quarter inch pipe large enough?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many times bigger is a 10 inch pipe than a 8 inch pipe?

Every time! lol Seriously a 10-inch pipe is 5/4 of an 8-inch pipe


Is three quarter inch water pipe actually three quarter inches in diameter?

Inside diameter, it is usually considered nominal. Anything is considered to be the size it is called, if you use fine enough measure almost anything is going to vary or be off a few thousands of an inch.


How much slope do you need for a drain pipe from a new bathroom and what do you do if there isn't enough slope?

One quarter inch per foot is standard "slope". This equates to a quarter bubble on a level. If you don't have at least one eighth of an inch "slope", your drain will not work properly and will clog constantly.


What does a ninety degree angle of three quarter inch copper pipe equal in length of pipe?

It equals 3/4" in length.


How much water can be pumped through a half inch pipe?

Given enough time the entire ocean could be pumped through a half-inch pipe.


What can you buy with a quarter pipe?

You could sell a nice quarter pipe on ebay for 100 or 150 dollars. The person you are selling it to should be close enough so they can pick it up themselves.


On a house lateral line is the slope a quarter of an inch per every four feet of pipe?

For proper fall. Pipe should slope 1" for every 8'.


What diameter copper pipe should you use to connect with 1 galvanized radiator pipe I've been advised to reduce to a three-quarter inch copper pipe.?

If you had been advised why ask again?


Will a quarter inch pipe stepped up to half inch pipe result in a lower pressure for an outside hose bib or do I need to keep all at a half inch to add the hose bib?

i believe the pressure does not change but the volume of water you will be able to use will be less


How many gallons 30 inch pipe?

The answer depends on the length AND the cross-section of the pipe. Just one of the two measures is not enough.


Can you use refrigeration tubing for your hot and cold supply lines above ground?

No, refrigeration pipes are normally quarter of an inch, this pipe size is far too small, use the industry standard, half inch pipe size.


What is the inside diameter of 0.75 inch pipe?

Three-quarter inch diameter pipe refers to the outside diameter. Different pipe types of the same outside diameter usually have different inside diameters. ASTM SCH 40 pipe of 3/4 inch diameter has an inside diameter of 0.824 inches. ASTM CL 200 pipe of 3/4 inch diameter has an inside diameter of 0.930 inches because of the thinner wall.