0
What else can I help you with?
What is absolute peak anaerobic power?
Absolute peak anaerobic power is how much power (in Watts) a person can exert at one time. There are many ways that absolute peak power can be measured but a common way is a 30 sec wingate test which is done on an exercycle. Absolute peak power differs from relative peak power as relative peak power takes into account the persons weight, where as absolute doesnt. Therefore the bigger and stronger you are, the higher your absolute Pp would generally be. But when converted to relative Pp (absolute Pp/weight), you have a Pp relative to each person - not worrying about the persons own weight so you can compare using this.
The katch test and the wingate test measures what aspect of energy -generating capacity?
peak power and anaerobic capacity
Explain quantitatively why the maximum power transfer curve is not symmetrical about the point where the source resistance equals load resistance?
when we look at the curve ,, we can see that before the peak point curve has greater slope as compared to the slope after the peak point .. the reason is PL is given as I^2RL ,,, current is a squared term here . before peak point current is greater so overall change in power is much greater but after peak point RL is greater and current is less now the load resistance is not a squared term... so slope will be less. therefore the curve is not symetrical
What does peak power and continuous nominal power handling in car speakers?
Peak power is the highest rated output of the speaker when loud (or peak) parts hit. Continuous/nominal power is the average output at normal and continuous listening levels. If you have the Peak Power rating, you can figure out the nominal level by multiplying the peak power by the square root of two (0.707). Peak Power * 0.707 = Nominal Power.
When was Rome's power at its peak?
Rome was at its peak of its power during the reign of Augustus.
What is the conversion for rms power to peak to peak power?
RMS power is Peak-To-Peak power divided by the square root of 2.This definition, however, only holds true for a non-reactive, or resistive, load, with a power source that is truly sinusoidal.
What is the peak power of the Kicker 08DS12L72?
The peak power of the Kicker 08DS12L72 is 1500 Watts.
When was Comanche Peak Nuclear Power Plant created?
Comanche Peak Nuclear Power Plant was created in 1974.
What is the difference between Peak and off peak?
peak is when the demand of electric power is very high, and off peak is when the demand is low
Peak power 400 watts how much is continuous power?
Around 150Watts. continuous/nominal power is found by multiplying the peak power by the square root of two (0.707). in this case peak power = 400, therefore 400 * 0.707 ≈ 280 watts
What is the difference between mean and peak power?
Mean power is the average power output over a given period of time, while peak power is the maximum power output achieved at any point during that same period. Mean power gives a representation of overall effort, while peak power shows the highest intensity reached.
What is the formula of power dissipation for a peak to peak square wave?
treat the square wave same as DC of half the peak to peak voltage.
