stress is directly proportional to strain up to the proportional limit. Their ratio is young's modulus.
gravitation is inversly proportional to weaight
the magnetizing curve is the relation b/w air gap flux and the field winding current armature EMF. the resulting curve is called magnetizing characteristics or open circuit characteristics. at any speed by recognizing that the induced emf is directly proportional to the speed
The diode that has a negative resistance region in its voltage-current curve.
The performance curve can be a graph of torque versus speed. The torque is zero at zero speed and also at the synchronous speed. Normally an induction motor operates at 90-97% of the synchronous speed, where the slip is between 10% and 3%. In this region the torque is proportional to the slip. As the torque is increased the speed falls until the motor stalls and the speed drops to zero. Below the stalling speed the torque rises between zero speed and the stalling speed. Because the torque is 0 at 0, a single-phase induction motor needs a separate starting winding fed by a starting capacitor to produce a little positive torque that starts the motor.
Brittle materials such as ceramics do not have a yield point. For these materials the rupture strength and the ultimate strength are the same, therefore the stress-strain curve would consist of only the elastic region, followed by a failure of the material.
plastic behavior is the region where we have the non linear curve and upon unloading the shape can not be recovered.at this region,the stress is not directly proportional to strain i.e Hooke's law is not obeyed
Toe region is spartacus!
region
A battleship curve is a region found in archaeology where it is thought a battleship may once have lain.
on youtube, there are some great videos about economics by pjaholden
A battleship-shaped curve is a region found in archaeology where it is thought a battleship may once have lain.
Zener diodes are normally operated in their reverse breakdown voltage curve.
The modulus of elasticity is the slope of the linear portion of the curve (the elastic region).
gravitation is inversly proportional to weaight
The related link below illustrates 3 ways of drawing a curve. The techniques are easily adapted to a quadratic curve.
the curve elastrate different, processes that are taking place with the deformation of the material,there is the elastic region the after plastic region which is followed by material being broken
It will shut down.