Yes, ball sparks gaps is the official way to calculate the breakdown voltage of air at specific temperatures pressures and humidity over a distance.
Gases behave most ideally at low pressure and high temperatures. At low pressures, the average distance of separation among atoms or molecules is greatest, minimizing interactive forces. At high temperatures, the atoms and molecules are in rapid motion and are able to overcome interactive forces more easily.
the break down strength of transformer oil is in between 30kv and 40kvCommentA breakdown voltage doesn't mean anything unless it is expressed in terms of distance -e.g. volts per millimetre.
The resistance force multiplied by the resistance distance.
theodolite are use in construction calculate the angle and horizantal distance and for fixed the point
Hi, I may be wrong and correct me if i am. Work is the force applied over a distance: F x d. So to calculate the work of a spiral spring it would be the spring coefficient (usually denoted as "k") times the distance. But you have to remember that the spring force is kxd, so you have to integrate the force over the distance, which will yield the following equation: work is equal to 1/2 the spring constant times the distance squared. W=(1/2) k d2
Gases behave most ideally at low pressure and high temperatures. At low pressures, the average distance of separation among atoms or molecules is greatest, minimizing interactive forces. At high temperatures, the atoms and molecules are in rapid motion and are able to overcome interactive forces more easily.
That depends on the speed. Divide the distance by the speed to calculate this.That depends on the speed. Divide the distance by the speed to calculate this.That depends on the speed. Divide the distance by the speed to calculate this.That depends on the speed. Divide the distance by the speed to calculate this.
time = distance ÷ speed
You would have a very tough time, because that isn't the formula to calculate work. (distance) divided by (time) is the formula to calculate speed. The formula to calculate work is: (force) multiplied by (distance).
Distance.
Distance (to an object).
Speed times Time = Distance
Distance = time x speed
Speed = distance divided by time
Distance divided by speed is used to calculate time.
Not enough information. You can't calculate the age, based only on the distance.
A laser measuring device can calculate distance. However, measuring distance with a laser measure can be easier or more difficult depending on the model you purchase.