four feet i think may be less that may be gas im thinking of
The two most important ratings for an electrical heater are its rated power and its rated voltage, and these will be printed on a 'nameplate' fixed somewhere on the heater (e.g. '3 kW at 230 V').For the heater to operate at its rated power, it must be subject to its rated voltage. In the above example, the heater will only operate at 3 kW if it is supplied with 230 V.If you know the heater's power (P) and its voltage (U), then you can calculate the rated current (I) it will draw from the supply, using the equation: I = P/U.You can also determine its resistance (R), using the equation R = U2/P.
56days and 7hours & 32 mins & 18seconds.
The electric switch heater uses high voltage, from 480 to 750 volts, through coils that are fixed both on the web of the rails and with "crib heaters" that are laid underneath the movable rods between the ties. These are typically more effective than other types of switch heaters because of the ability to provide the crib heaters, which cannot be used with gas heaters. The heating elements are provided throughout the area of the movable parts of the switch layout.
Electrical power is expressed in watts or in jouls per secondAnother AnswerThere is no such thing as 'electrical power'. Power is simply a rate: the rate of doing work. Power can be measured in watts (in the SI system) or in horsepower (in the Imperial system). There is no reason why the power of a heater can't be measured in horsepower or the power of a car can't be measured in watts.
A. The measure ofelectricalpressure.
Yes, an electrical base board heater can be classified as an appliance.
Most electrical heaters will have an off/on switch, located usually on the side of the heater. If you've already looked for this with no avail, I would recommend either looking for the information booklet that came with your electrical heater, or calling your electrician for help.
Example is ,an electrical heater connected to a main switch and the heater is placed in a bucket filled with water.
Electrical to heat.
By overheating which will cause a change in the thermostat materials construction.
A space heater.
plug a block heater plug into any household 120 electrical outlet just like plugging in a heater in your house
Electricity energy is converted into internal energy through work. As the internal energy of the heater increases so, too, does its temperature. Energy is then lost to the surroundings through heat transfer. The change in the heater's internal energy is the difference between the work done on the heater and the heat transfer away from it.
there seems to be a short in the electrical system, i would start by checking the heater switch,
There are two insulated heater elements that heat the water.
television,computer,microwave,heater,socket
electrical ----> heat OR chemical ----> heat