work_done = force x distance
In igniting a match a force is applied to push the match a distance along the box, thus work is done.
Yes the end of the match is being rubbed on the material on the side of the match box causing enough friction to start the match burning.
In throttling process, work done is zero.
A good DEED is a palindrome for good work done by a scout.
That means that no work is done.
no, work done is the area under a force-distance graph
Yes the end of the match is being rubbed on the material on the side of the match box causing enough friction to start the match burning.
no work will be done because force is applied but displacement is zero so no work will be done.
Yes.
That depends on whether you are considering the work done to overcome the force of static friction between the match head and the striking paper. Other than that, as I understand it, after you have heated part of the chemical compound on the match head sufficiently so that it combusts, the heat it outputs then affects the chemicals in close proximity heating them to the point of combustion. I'm not sure you could consider that chemical reaction to be work done, but you could argue it outputs energy.
Then it makes it hard to flex the stick, which will make it harder to shoot the puck and also lower the accuracy. It will also be heavier than a normal stick, which will make it tougher and more tiring to work with during a training or match.
Sawdust will work if you use enough.
Diesel engines work in a different way to petrol in that they work on pressure to ignite warm diesel as opposed to petrol engines which have spark plugs. in order to work, there can be no air, air wont ignite!!
you strike the match
A spring scale and a meter stick. Spring scale may be used to find force exerted. Meter stick finds distance through which force was exerted.
um i didnt no but you need batteries (in the bottom) and if you've done that then you have to stick the pen in the gun really hard then you chose your pattern or picture that you want and peel of the outside stick it on your arm and spray
She head-lined her own tour called Tara Lipinski's Miracle Match Tour to raise money for leukemia.
It may still work it it got damp and dried out, but the reliability and burn rate will be sporadic at best. You can test the powder to see if it will first, ignite and second compare burn rate with fresh powder. Measure two like amounts, one fresh and one old or the damp powder, place one measure on a dry safe place, and ignite it. Do the same with the other and compare. Use small amounts, 20 grains or so and it should be obvious if there is a difference. You should get a "poof" not a "hiss" Also I have found it best to use a long fireplace match or a match taped to a longer rod.