answersLogoWhite

0

Did you mean quarters? 4 quarters are in 1 whole so no.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Is three quarters of an inch less than an inch?

Yes.


How big its 3.94 inch?

3.94 inch is three-fiftyeths of an inch less than 4 inches.


Which is less than 28 inches or 1 yard?

1 inch is less than 28 inches or 1 yard.1 inch is less than 28 inches or 1 yard.1 inch is less than 28 inches or 1 yard.1 inch is less than 28 inches or 1 yard.


What does .75 of a inch mean?

.75 of an inch means three-quarters of an inch, which can also be expressed as 75 hundredths of an inch. In fractional terms, it is represented as ¾. This measurement indicates a length slightly less than one inch.


Is 200mL less than 124 inch?

yes 200ml is less that an 124 inch


Can a string be 3 inches to the nearest inch half inch and quarter inch explain?

3 inches to the nearest inch and 3 inches to the nearest half inch both refer to a length not less than 2.5 inches and less than 3.5 inches. 3 inches to the nearest quarter inch refers to a length not less than 2.75 inches and less than 3.25 inches.


What is 0.787401575 inch?

0.787401575 inch is slightly less than four-fifths of an inch.


Is 0.02 inch less than one fourth inch?

Yes. One fourth inch is 0.25 inch. That is much larger than 0.02 inch.


Is 1 inch less than 1 cm?

No, an inch is about 2.54 times greater than a centimeter.


How small can the esophagus diameter get?

diameters as small as one-eighth inch have been seen. When the inside diameter is less than about three-fourths of an inch, intermittent difficulty with swallowing can result.


What does 0.28 look like on a ruler?

On a standard ruler, 0.28 inches is slightly less than 1/3 of an inch. It would be located just past the 1/4-inch mark, which is 0.25 inches, and before the 3/8-inch mark, which is 0.375 inches. To visualize it, you can estimate that it's about a little less than three-tenths of an inch from the zero mark.


Isuzu Rodeo rear rotor thickness?

The rear rotor thickness should be three quarters of an inch, when new. The rotor should not be reused when the thickness is less than one half inch.