0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much water in one an half inch Pipe?
Depending on the length of the pipe, it could range from nearly none to billions of gallons!
How much water does a pipe 6 inches in diameter times 500 feet long?
A pipe does no water. Te capacity of the pipe with the given dimensions is approximately 98.2 US gallons. Whether or not the pipe holds any water is impossible to say.
How much water will a twelve inch pipe move per second?
Depends on the diameter of the pipe and the speed at which the water travels through it.
How many gallons of water in a 2 pipe 30' long?
There is no obvious reason why there should be any water in the pipe. Furthermore, there are no units associated with the width of the pipe, so its volume cannot be calculated.
How many gallons of water in 24 pipe?
A gallon is a measure of volume and that requires more than one dimension.
What is a four letter word for water chute?
One possibility is the word pipe. For example, water flows threw pipes.
Is wind pipe one word or two?
One word; 'windpipe'.
How many one inch pipe equals for one four inch pipe for water distribution?
16
What word has 7 letters that answer to water flowing drip by drip from a pipe?
leaking
How far must water travel in a one inch pipe to lose one degree in temperature?
We need to know more info. such as, is the pipe cooled, air or ground temp. around the pipe. what temp is the water.
What is the maximum amount of water that can flow in a 2 inch pipe one half mile long?
Insufficient information, one needs to know the pressure of the water entering the pipe, the relative heights of both ends the pipe, the pressure of the water at the discharge of the pipe, the geometry of the pipe including the number and types of turns, and the pipe material or internal friction coefficient. Then you can calculate the flow.
How many gallons of water are there in a 10 inch pipe one foot long?
There need not be any water at all in the pipe. The capacity of the pipe is approx 3.4 Imperial gallons.
How many gallons of water are in one foot of 20 pipe?
The capacity of one foot of a pipe with an inner diameter of 20 inches is approx 1.36 US gallons. The maximum amount of water is, therefore, 1.36 gallons, but there need not be any water in the pipe.
Hot water pipe or cold water pipe which will rust first?
Hot water pipe rust first as compared to the cold water pipe for the same chemical composition of the water.
Will water flow out of a pipe if the pipe is covered with water?
Yes, as long as the water coming out of the pipe has a greater pressure than the water that is covering the pipe. If it is the other way around, the water covering the pipe will actually flow into the pipe. Think about it. It just makes sense.
What is water supply water pipe?
Supply coming from water source is a water service line.
What is the difference between wet stand pipe and dry stand pipe?
One has water in it or wet .one is emptyfull of air snd has flapervalve
