Given enough time the entire ocean could be pumped through a half-inch pipe.
Depends on what's flowing (gas or water or something else) and under how much pressure.
Depends on the diameter of the pipe and the speed at which the water travels through it.
2.75 Imperial gallons.
It depends on the length of the pipe.
Given enough time the entire ocean could be pumped through a half-inch pipe.
More, depending on how long you allow the flow to flow.
Depends on what's flowing (gas or water or something else) and under how much pressure.
The volume of the pipe is 0.2078 gallon per foot of length.I have no idea how much water might be in it.
A 5-inch pipe will hold approximately 0.36 gallons of water per linear foot. This calculation is based on the formula for calculating the volume of a cylinder (V = πr^2h), where the radius (r) is half the diameter of the pipe (2.5 inches) and the height (h) is 1 foot.
A two inch pipe can hold 0.1632 gallons per foot. It takes slightly over 6 feet of two inch pipe to hold one gallon of water.
The capacity of a pipe with a 54 inch inner diameter and a length of 120000 inches is 1,099,306,101 cubic inches, approx = 636,173 cu feet. There may or may not be any water in the pipe!
Depends on the diameter of the pipe and the speed at which the water travels through it.
A 1.5 inch (diameter) pipe that is 10 feet long can hold approximately 3.32 gallons of water. This calculation is based on the volume of a cylindrical pipe.
You need to know both length and circumference of the inside part of the pipe.
4324
A lot