Find its volume (the shape is a cylinder) and multiply by the density of copper.
You can't. You'd need to know density and height of rod.
The weight of 1 foot of steel rod would depend on the diameter of the rod.
A rod is five and a half yards. To convert from square yards to square rods (why you would want to do such a ridiculous thing, I can't imagine) you divide by 30.25, which is 5.5 squared.
An inflated ballon
A pole (also called a rod or perch) is an old form of linear measure equivalent to 5½ yards which is 16½ feet. To convert poles to feet multiply by 16½ - or multiply by 33 and then divide by 2.
it is a rod made of copper
because copper cannot conduct static energy but polythene can.
Copper rod is covered by insulating materials, because copper is good conductor of electricity when we touch copper rod we get shock and insulators are bad conductor of electricity hence copper rod is covered by insulating materials
Because Copper is a conductor and conductors do not hold electricity. The charge flows out. But, A copper rod can be charged if it is in a rubber handle. This will result in the charge staying in the rod, thus charging it.
Before you can get a copper fishing rod are you sure you have followed this checklist?1. I Own enough copper to give to the black smith for the Copper fishing rod?2. I have enough experience with my fishing rod that it can be upgraded to copper?3. Do I have enough gold to get my fishing rod upgraded?4. Do I own a fishing rod?If those 4 are ALL complete you should be able to get your fishing rod upgraded.
First, you need a fishing rod. Then you go to the general store and upgrade to a iron fishing rod. After that, you can then upgrade to a copper one, and finally you can get silver. The blacksmith doesnt work for me, I go to the general store. HOPEE THIS HELPSSS!!!
Before you can get the gold fishing rod you have to get the silver fishing rod and before you get the silver fishing rod you have to get the copper fishing rod. To get the copper fishing rod you upgrade your regular fishing rod at the general store.
copper is a metal but it is a non ferrous metal
Titties
You braze copper with a copper brazing rod. It does require a certain amount of skill and practice.
If the copper rod is connected into the electric circuit in place of a piece of wire, it would have no effect at all on DC or low-frequency circuits. But the box used to hold the circuit would probably need to be bigger, because copper rods normally come in 6-foot lengths.
You usually do not braze copper, you solder it. If you were to use brazing rod on copper, the copper would have very close to the same melting point as the brazing rod. This makes it difficult to do. As far as preheating the copper, it needs to be hot enough for the brazing to flow.