The formula to dertermine the size of an object using mil dots is:
Distance (in yards) x height (in mils)
----------------------------------------- = size of the object in yards
1000
to find out the size of the object in inches, simply multiply your answer by 36 (because there are 36 inches in a yard)
A mil dot is a type of reticle used in firearms scopes, featuring dots spaced along the crosshairs at one-mil intervals. A mil, short for milliradian, is an angular measurement that helps shooters estimate distance and make adjustments for bullet drop and wind drift. By knowing the size of an object in meters and using the mil-dot reticle, shooters can calculate the distance to the target based on the apparent size of the object in the scope. This system enhances accuracy in long-range shooting.
No. dot Com is a COMMERCIAL web address. Military addresses are dot MIL or dot GOV
1,570,000 Unless you are using mil to mean "millimetre" then 1.57 mil = 1.57 mm = 0.00157 m Or you are using mil to mean "millilitre" then 1.57 mil = 1.57 ml = 0.00157 l. Or you are using mil to mean "thousandths of an inch" then 1.57 mil = 0.00157 inch.
See http://www.pyramydair.com/site/articles/mildot/
there are 2. 1 is 14 mil. the others are 17 mil.
1,430 mil (2,302km) In diameter
13 mil
9.83 mil square km
Mil etter mil was created in 1978.
6 mil is thicker than 4 mil.
1000 is mil and there are 2 so dos mil and 1 is uno dos mil uno
5 mil