0
What else can I help you with?
The area of a square piece of wood is 81 sq inches what is the length?
9 inches
How do you make a bat?
You make a bat by turning it on a wood lathe. A squared piece of wood that is just a few inches longer than the finished length of the bat, is mounted onto a lathe and the woodturner works the piece of lumber (usually ash) with woodturning chisels, gouges, etc.
What is the actual size of a 1x2 piece of wood?
A 1x2 piece of wood typically measures approximately 0.75 inches thick by 1.5 inches wide and can vary slightly depending on the type of wood and any machining processes.
How much does a 2x8x10 piece of wood weigh?
A piece of wood that is 2 inches thick, 8 inches wide, and 10 feet long will weigh approximately 65-70 pounds, depending on the type of wood and its moisture content.
What if 6 foot long piece of wood cut off piece of wood that was 18 incheslong how many feet is left?
4 feet 6 inches
What type of wood are 2x4 made of?
A 2x4 is simply a piece of wood- ANY wood- that is 1 1⁄2 inches by 3 1⁄2 inches. They are commonly made from pine, fir or spruce, but COULD be any wood.
How many square feet in a piece of wood 67 inches x 54 inches?
Approx 25.13 square feet.
What is a 2 by 2?
Usually it means a piece of wood/lumber that has a cross-sectional area of 4 square inches, meaning that the cross section is a square of 2 inch side.
How many pieces of wood measuring 3.75 inches long can be cut from a piece that is 30 inches ling?
30/3.75= 8
How much wood was needed to frame the Mona Lisa painted on a piece of pinewood 30 inches by 20 seven eighths inches in 1506 by Leonardo da Vinci?
2 pieces of wood 30" = (1 piece of 60 inches cut in two)2 pieces of wood 20 & 7/8ths inches (approximately 42 inches total, but likely was cut before purchase so 2 pieces the exact length needed).*Frames are 4 pieces of wood with a miter (angle) cut, with the wood pieces glued and joined at the mitered corners.
How many 15 inch pieces of wood can be made from a piece of lumber that is 110 inches long?
7
A carpenter is sailing on a ship and the ship springs a leak He measures the hole and it us exacly 12 inches square The only piece of wood he has was 9 inches by 16 inches He thinks about it and cut?
He will have to make 3 cuts to the 9 by 16 piece of wood which will give him a 9 by 12 piece and 3 pieces of 3 by 4 which will fit exactly into the 12 by 12 hole.
