100 inches on every side.
The dimensions of a square with an area 36 square inches are:Side lengths: Six inchesPerimeter: 24 inchesDiagonal measurement: 8.485 inches
There are 144 square inches in a square foot, so 10000 square inches is equivalent to approximately 69.4 square feet (10000 / 144).
Without the dimensions, we won't be able to tell. The area of a rectangle is the length times the width. If those dimensions are in inches, the area will be in square inches.
A "something" with the dimensions of 15x15 inches has an area of 225 square inches. Since the sides are the same, this "something" can be considered as a square.
8inches time 3inches
.15=suck it
To calculate the square inches from lineal inches, you need a specific width measurement. If we assume a width of 1 inch, then 10000 lineal inches would equal 10000 square inches. If the width is different, you would multiply the lineal inches by the width in inches to get the square inches.
We wouldn't know the dimensions without knowing the shape of the area. 10,000 acres is 48,400,000 square yards. That would be a square with 6957.01 yards a side.
Area is proportional to the square of the linear dimensions. If the linear dimensions are doubled, the area is increased by a factor of 22 = 4. The new area is 9 x 4 = 36 square inches.
15 and 20 inches because these dimensions comply with Pythagoras' theorem and the area of the rectangle.
Its dimensions are 6 inches by 7 inches because 2(6+7)=26 inches and 6*7=42 square inches
The area 22 inches times 22 inches = 484 square inches.