you could weigh one square foot of your material and, assuming it is of uniform height across the entire area, multiply the weight of that one square foot by the total number of square feet. OR more technical, tonnage i assume is a mass measurement. thus you need the density of your material. you will also need to multiply the square footage by the height of the material, in feet. you may need to convert from feet to some other unit of length after you find the density also.
Wiki User
∙ 14y agoA square of siding is a 10x10 foot section , so it's 100 square feet.
There is no answer to this question. A square foot is a volume measurement and feet are units of length.
A square foot is a measurement of area. An inch is a measurement of length. They are not compatible.
A foot is measured in a strait line, its a linear measurement of 12 inches.. A square foot is 12^2, or 144 square inches, it a box with 4, 12" sides.
No. It it is a derived measure in the Imperial System.
No one answer, since it depends on the shape of the 400 square foot figure. If it is a square 20x20, then the diagonal is about 28.25 ft.
100sqft
Not possible to answer - a cubic foot is a measurement of volume, a square mile is a measurement of area!
Measure the circle's radius and square it. Multiply the result by pi. This number is the circle's lineal foot measurement.
The amount of fluid ounces in a kilogram can not be worked out without knowing the weight of the fluid ounce involved.There is no way to equate wattage (an Electrical measurement) with Tonnage (a measurement of weight.)How many yards does 99 cubic feet equal? A yard is a one dimensional measurement of length and a cubic foot is a 3 dimensional measurement of volume, one does not work with the other.How many square inches are in 6 cubic centimeters. Square inches are a two dimensional figure And cubic centimeters are 3 dimensional one does not relate to the other.
it's not an amount of feet. a square foot is a square, that is a foot by a foot. A foot is a unit of measurement. A square foot is also a unit of measurement. Whenever you measure a length, such as with a tape measure, you are measuring in feet. If you are measuring the area of a shape, you are measuring in square feet.
A square foot is a common American unit of measurement. A square foot is equal to 144 square inches.
A square of siding is a 10x10 foot section , so it's 100 square feet.
There is no answer to this question. A square foot is a volume measurement and feet are units of length.
A square foot is a measurement of area. An inch is a measurement of length. They are not compatible.
Square foot or cubic foot.
The diagonal of a 36 x 36 foot square is 50.91 feet.