answersLogoWhite

0

What else can I help you with?

Related Questions

Check transmission fluid with the engine on?

Yes, so the pump is running, otherwise you get a false full reading.


How do you add transmission fluid to a 2004 Sunfire?

Through the dipstick tube. keep engine running so you don't get a false full mark. (convertEr not in motion/pump not running)


You should check your oil every time you fill up your gast tank. True or False?

This is a good practice to prevent engine damage from running the engine low of oil. You must let the engine set for at least 5 minutes before checking the oil level. Otherwise you will get a false reading. DO NOT OVERFILL!


When checking engine oil allow the engine to cool completely true or false?

False. On most engines you actually want them running while you check the oil! Oil is meant to lubricate the engine while it's RUNNING, your only concern should be with the oil level while it's doing what it was meant to do.The above answer was posted by a fool. Of course you check the oil with the engine off, vehicle parked on a level surface. Check it after the engine has not been run for 30 minutes to get an accurate reading. Add only what is necessary to reach the full mark and do not overfill.


True or false is The detailed work of running a school usually rests with the state board of education?

false


Is it true that the first step in running for public office is conducting a fact finding campaign?

False


True or false The question Should everyone buy a car with a hybrid engine can be answered using a scientific approach?

Answer this question…False


What True or false lubricants reduce friction by replacing sliding friction with fluid friction?

True. Lubricants reduce friction by forming a thin layer between moving surfaces, which helps to replace sliding friction with fluid friction. This allows for smoother movement and decreased wear on the surfaces in contact.


Does a 95 sable have to be running to check the transmission fluid?

Any engine needs to running, and at normal operating temperature, before ever checking the transmission fluid level. Checking this fluid without the engine running will give false readings indicating a full reservoir, when in fact if running, may not even be half full in some instances. Equally as bad as a half full transmission is one that is overfilled - too much of a good thing will also kill the transmission.


Lubricants do what to friction by replacing sliding friction with fluid friction?

the correction option is true :)


There are many potential hazards in the small gas engine shop. True or false?

There are many potential hazards in the small gas engine shop. True or false?


What is the transmission fluid level for 1995 Jeep Cherokee limited?

There's a dipstick to measure it just like oil. Add through the tube with the engine running so you don't get a false full reading.