Just change the switch, The type of wire has no bearing. The insulation will be brittle. If needed wrap the ends in the box with electrical tape. Only other solution is replacing the wire which means ripping out the wall and ceiling to get to the wire.
Wire rope has finer strands and more of them. Because of this, rope is more flexible and stronger. Rope tends to unroll and stranded wire will stay bent.
When a Crane wire rope deteriorates its called Complete rope core failure.
wire rope
you will need 2-3way switch and 2-4way switch
A metal rope is also called a wire rope.
Yeah you can. It's better to use the plastic blockers that come on the rope, But it won't hurt your rope to use wire blocks.
Get some very thin wire and wrap the tip of the rope a couple of time. Leave a few inches of wire sticking out the front of the rope tip. Tread the wire through the rope tightener and then pull the wire out and it should bring the rope out which will be tied to the wire. It will help if you also pull the tip of the tightener so that the rope can go through more easily.
Devils Rope Barbed Wire Museum was created in 1991.
a rope consisting of three wire strands and three fibre strands layed right handded around a fibre core
Wire rope was invented by a German named Wilhelm Albert in the years between 1831 and 1834
Nylon is a commonly used material in rope because it is exceptionally strong and rope and wire are basicly the same thing. So pretty much it just means making rope out of nylon.
It depends on the density of the rope.