The smallest size breaker is a 15 amp and with a #14 wire which has a capacity for 15 amps and a 120 volt source, this combination will give you the capacity up to 1800 watts. W = A x V, 120 x 15 = 1800.
40 watt light bulb. This is obvious. Go do an experiment. -_-
k is 1000 V is volts A is amps basic algebra kVA = (V * A)/1000 120 Volt with 20 Amp would be: (120 * 20)/1000 = 2.4 kVA
carrots, potatoes, and mush roomms.
50 watt equals less than 1/2 amp current flow at 120 volts so you can have 30 light on a 15amp breaker or 40 on a twenty amp breaker.
A 55 watt fluorescent light only pulls 0.4 amps. Lights can be installed on a 15 amp breaker using 14/2 wire. A maximum of 1440 watts is all that is allowed on a 15 amp circuit.
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
Yes, if that is all that is on the circuit.
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.
A 60 watt light bulb is a light bulb with 60 watts capacity. When talking about watts, you're talking about the power that is transferred from the appliance to the accessories. Therefore, the light bulb labeled "60 watts" takes 60 watts to light up. A 60 watt light bulb will not be as bright as a 120 watt light bulb.
james watt
40 watt light bulb. This is obvious. Go do an experiment. -_-
An electrical watt is a measure of power. A 40 watt light bulb uses 40 watts of electrical power. It has a relative measure of twice the light output of a 20 watt bulb and one half the output of an 80 watt bulb. A 40 watt bulb uses 40 Joules of energy each second, or 40 watt-hours of energy each hour. In 1000 hours it uses 40 kilowatt-hours or Units of electrical energy.
Yes, considering you can do that on 15 amp breaker easy.Experience in construction field. The worst that will happen is that the breaker will trip off after a few minutes.In the formula W = A x V. W = 20 x 120 = 2400 watts. If you want you can operate two 1000 watt lamps from a 20 amp breaker operating on 120 volts.
the highest light bulb is 100
Yes, it will be perfectly safe.
~9.1 Amps P [W]= E [V] x I [A]
If you dont mind splodey light bulb.