0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Width of a 2 by 4?
The actual dimensions of a modern 2x4 is 1.75 by 3.5 inches.
How wide is a 2X6?
A 2X6 is 5 1/2 inches wide. Incidentally it's 1 1/2 inches thick. Pre-WWII lumber was cut at stated dimensions, a 2x4 was actually 2 inches by 4 inches.
What is a three-dimentional shape?
On paper = 2 dimensions Physical = 3 dimensions Examples: a square is 2 dimensions and a cube is 3 dimensions a circle is 2 dimensions and a ball is 3 dimensions
Is a ray in math 2 dimensions?
A ray can be in 2 dimensions, in 3 dimensions, or in fact in any number of dimensions.
In a 2-D figure how many dimensions are there?
2-D means 2 dimensions.
How thick is a 2 inch treated lumber really?
1 1/2 in. subtract 1/2 inch
What are the dimensions of a 2 by 4 piece of lumber?
The 2x4's I use measure 1 and a half by 3 and a half.
Presssure treated lumber 2 x 4?
Is good whenever there is the potential for water/rot/insect problems.
What is the tensile strengthof pressure treated wood?
Depends on the dimensions and type of treated wood. Not signifcantly different from untreated wood.
What is the history of the board foot?
The board-foot is a specialized unit of measure for the volume of lumber in the United States and Canada. It is the volume of a one-foot length of a board one foot wide and one inch thick.Board-foot can be abbreviated FBM (for "foot, board measure"), BDFT, or BF. Thousand board-feet can be abbreviated as MFBM, MBFT or MBF.In Australia and New Zealand the term super foot or superficial foot was used to mean the same.[1][2][3]One board-foot equals:1 ft × 1 ft × 1 in12 in × 12 in × 1 in30.48 cm x 30.48 cm x 2.54 cm144 in³1⁄12 ft³2360 cm³2.360 liters0.002360 cubic meters or steresBoard foot is the unit of measure for rough lumber (before drying and planing with no adjustments) or planed/surfaced lumber. An example of planed lumber is softwood 2x4 lumber one would buy at a large lumber retailer. The 2x4 is actually only 1+1⁄2 × 3+1⁄2 in (38 × 89 mm) but the board footage for the lumber when purchased wholesale could still be represented as full 2x4 lumber, although the "standard" can vary between vendors. This means that nominal lumber includes air space around the physical board when calculating board feet in some situations, while the true measurement of "board feet" should be limited to the actual dimensions of the board.For planed lumber, board-feet refer to the nominal thickness and width of lumber, calculated in principle on its size before drying and planing. Actual length is used.See dimensional lumber for a full discussion of the relationship of actual and nominal dimensions. Briefly, for softwoods, to convert nominal to actual, subtract ¼ inch for dimensions under 2 inches (51 mm); subtract ½ inch for dimensions under 8 inches (203 mm); and subtract ¾ inch for larger measurements. The system is more complicated for hardwoods.An Essex table is a tabulation of the number of board feet in lumber of varying dimensions.[4]
Weight of 2 x 6 x 12 pressure treated lumber?
http://www.brownlumberservice.com/PDF/lumberweight.pdf
Width of a 2 by 4?
The actual dimensions of a modern 2x4 is 1.75 by 3.5 inches.
What is the most common framing in residential construction?
There are four different types of framing lumber. The common framing lumber are Spruce-Pine-Fir, Structural Southern Yellow Pine, Machine Stress Rated Lumber, Treated Southern Yellow Pine #2 and Better, and Bluwood.
How much does 1 foot 2 by 4 weigh?
A 2 by 4 (lumber) will have a weight based on the density of the wood. Pine, fir, redwood, treated or untreated will have different densities.
Is it ok to burn plywood and 2 x 4's in a fireplace?
NEVER burn lumber in a fireplace. its been treated with chemicals and preservatives you dont want to breathe!
How wide is a 2X6?
A 2X6 is 5 1/2 inches wide. Incidentally it's 1 1/2 inches thick. Pre-WWII lumber was cut at stated dimensions, a 2x4 was actually 2 inches by 4 inches.
What are the release dates for Lumber Baron of Jasper County - 2011 Operation Tier One Lumber Chicken 2-2?
Lumber Baron of Jasper County - 2011 Operation Tier One Lumber Chicken 2-2 was released on: USA: 22 January 2013
