0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
A long narrow cut in a piece of wood?
If it cuts the wood along the direction of the grain into two pieces, it could be a slice, or a rip cut. The same separation into two pieces- but across the grain- would be called a crosscut. Of course, if said cut renders a channel, it would either be a dado or a groove, depending entirely upon it's relation to the direction of the grain.
How much wood was needed to frame the Mona Lisa painted on a piece of pinewood 30 inches by 20 seven eighths inches in 1506 by Leonardo da Vinci?
2 pieces of wood 30" = (1 piece of 60 inches cut in two)2 pieces of wood 20 & 7/8ths inches (approximately 42 inches total, but likely was cut before purchase so 2 pieces the exact length needed).*Frames are 4 pieces of wood with a miter (angle) cut, with the wood pieces glued and joined at the mitered corners.
What is the name of the angles formed when the two pieces of wood are joined together?
intersection
If you have ten pieces of wood that are six feet long each what is the area?
60 feet
When A plank of wood is cut into w equal pieces. What fraction of the plank is 7 piece?
It is 7/w.
What is A narrow piece of wood or metal used to join pieces called?
It's called a dowel.
What is A thin narrow strip of wood?
A thin narrow strip of wood is either a lath or a slat.
What is hard floor?
Hard, or hardwood floor, is real wood cut into long narrow pieces. They commonly have a tongue and groove joint to connect them together on the sides.
What are some shaved pieces of wood?
Very thin pieces of wood are called "shavings."
What is the wood saw that is used to cut small pieces?
A "coping" saw. Has a very narrow blade usually mounted on a "D" shaped lire with a wooden handle on one end.
What do the kayapo people have in their mouths?
Pieces of wood
What do you use wood glue for?
You use wood glue for sticking pieces of wood together.
A long narrow cut in a piece of wood?
If it cuts the wood along the direction of the grain into two pieces, it could be a slice, or a rip cut. The same separation into two pieces- but across the grain- would be called a crosscut. Of course, if said cut renders a channel, it would either be a dado or a groove, depending entirely upon it's relation to the direction of the grain.
How many individual pieces of wood in a cubic foot?
it depends on how big the pieces are if the pieces are 2x2 there are three pieces
What are bits of wood after sawing called?
The fine dusty pieces of wood created by the teeth of a saw cutting through woodare called sawdust.The small pieces of wood left over after cutting wood to desired lengths are called offcuts.The thin slices of wood removed when chiseling or planing are called wood shavings.The fine pieces of wood removed when drilling or wood turning are called swarf.
What is the definition of beams?
Long, narrow strips of wood or metal.
What is the stave of a bow?
The stave of a bow is the part of the bow which is usually made of wood, has the handle, and is where you rest the arrow. It is also the part of the bow onwhich the string is attched. The definition of stave is one of the thin, narrow, shaped pieces of wood that form the sides of a cask, tub, or similar vessel.
