generally its used for fail-over and reliability. obviously the more connections you have the more reliable your connection however you also have to be aware that the more connections you have on multi-point you also have more security risks involved versus point-to-point connections in which there is only one port to watch and secure which will lower your total surface of attack area.
It is multipoint but it leases the capacity of the line specially. So in a sense it behaves like a point to point but a multipoint.
No, multi point fuel injection.No, multi point fuel injection.
there are two types of connection network: Point-to-Point Connection and Multipoint Connection
It has a Better spray pattern and also will inject fuel in the open intake valve (indirect injection).
Electronically Controlled ''Multi-point Fuel Injection''
Point to point connection
It is Point-to-Point connection because multipoint connection needs more than two end points.
A person can find a neutral connection point is testing the continuity of every neutral connection. This technique will enable a person to find a bad connection point.
The term, 'star point', refers to the common point of connection for the three windings of a star-connected (wye-connected) transformer connection. The star point is usually earthed (grounded) and provides the neutral point of the connection.
There should be some signal for point to point connection. P2P also used the same infrastructure as for the internet. Hence you should have a connection to make P2P.
depending on requirement either a permanent or disconnectable connection is selected when connectin optical waveguides
The definition of star connection is a connection of the ends of phase windings at the star point.