Rulers go up in mm, cm or inches. You can also get metre sticks that go up to 1 metre. You measure length by putting the 0 mark on the line and then where your line ends is how long the line/shape side is. If you want to measure say the length of a room with rulers you should use steel rulers which start at the end.
A foot is 12" An inch can be divided into smaller parts or fractions. Most tapes/rulers have 1/32 as the smallest mark (or each inch divided into 32 equal parts)from there-1/16, 3/32.1/8,5/32, 3/16, 7/32,1/8,9/32,1/4 etc
Most even marks like eights, sixteenths, quarters, halves and inches are prominent. To get to know them get a tape measure
find 1/16 and count out 16 to 1 inch to see where they are
do the same with eighths (count 8) and quarters (count 4)
Just use smaller fraction if there is one. For instance 2 quarters is 1/2-so you use 1/2. 2/16's is 1/8-so you use 1/8. In between the even increments, use 32's. Once you know the increments in 1 inch, you can measure anything. For length a tape is used which simply tells you how long something is in inches, For example 6' ll 3/4" -six feet, eleven and three quarter inches. Rulers are standard at one foot but same applies.
a ruler is used to measure it and cm, sometimes inches to
One could use a ruler.
There are many instruments: a ruler, a tape measure, a range finder.
a ruler is used to measure inches or 1 foot
As ACR tubing appears to be copper pipes, a tape measurer can be used to measure the length of tubing. A ruler can be used to measure the width and the bore of the pipes. If still not sure, take a small length of pipe to the supplier.
there are many instruments used to measure length depending upon the size of object , Ruler is Metric instrument used to measure length. Screw gauge is also used as an instrument used to measure length in mm.
the ruler was used to measure the length of my book.
a ruler!
Ruler.
metric ruler
Jim used his ruler to measure the length of his finger. Bob is the ruler of the world.
a ruler is used to measure it and cm, sometimes inches to
No, a ruler is used only to measure length, width or height. You must use a protractor in order to measure the degrees in an angle.
It measures length and distance.It shows the answer in meters, centimeters, or millimeters.
A ruler, a yard stick, and a tape measure can each be used to measure length. There are other instruments, but these are probably the most common.
Ruler, meter stick, yard stick
A ruler, yardstick, measuring tape