ten gauge wire is used for high current circuits. in home wiring, 12 gauge wire is normally used. 12 gauge wire can carry a maximum of 20 amps. 10 gauge wire on the other hand, is larger and can carry more current. the maximum current capacity of a 10 gauge wire is around 30 amps. one would use this for a stove, hvac or other power hungry device's.
A #10 copper conductor with an insulation factor of 90 degrees C is rated at 30 amps. This conductor can be loaded to 80 percent of its rating. 30 x 80% = 24 amps. So to answer the question a 10 gauge wire can carry any device load up to 24 amps.
10 is the gauge of the wire, 2 and 3 are how many leads are in the wire. For instance 10-2 wire is 10 gauge with two leads, 10-3 is 10 gauge with three leads.
30 gauge wire is much "thinner" than 10 gauge wire. Hence, if you are using 10 gauge for an application requiring only 30 gauge, it will more than handle any current flow. However, if the application requires 10 gauge wire you cannot use 30 gauge wire.
Wire gauges are defined in such a way that the lower the gauge, the thicker the wire. So, 8 gauge wire is thicker than 10 gauge wire.
12 gauge
#10 refers to the size in AWG (american wire gauge)
10 is the gauge of the wire, 2 and 3 are how many leads are in the wire. For instance 10-2 wire is 10 gauge with two leads, 10-3 is 10 gauge with three leads.
Normally AWG #10
30 gauge wire is much "thinner" than 10 gauge wire. Hence, if you are using 10 gauge for an application requiring only 30 gauge, it will more than handle any current flow. However, if the application requires 10 gauge wire you cannot use 30 gauge wire.
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.
Wire gauges are defined in such a way that the lower the gauge, the thicker the wire. So, 8 gauge wire is thicker than 10 gauge wire.
10-2 wire refers to 10 gauge, 2 conductor wire. Youshould use wire that is 10 gauge or larger (8 gauge, 6 gauge, 4 gauge, 2 gauge). The larger the wire, the more it will cost. most people install using the smallest size permitted, which in this case is 10 gauge. The are specifying the wire size to ensure that you do not connect the air conditioner to electric power using wire that is two small. If you are having problems with this type of question, you should consult an licensed electrician for help in connecting your air conditioner.
12 gauge
That particular wire is usually 10 gauge.
#10 refers to the size in AWG (american wire gauge)
10 gauge
no
12 gauge underground wire or if you think you will ever add any devices to this circuit use 10 gauge.