0
Still curious? Ask our experts.
Chat with our AI personalities
Professor
Jordan
MaxineNo, you should not use 10 gauge wire with a 30 amp dryer. A 30 amp dryer requires a minimum of 10 gauge wire, but it is recommended to use 8 gauge wire to ensure safety and to meet electrical code requirements. Using 10 gauge wire may cause overheating and pose a fire hazard.
Add your answer:
Earn +20 pts
What gauge wire and amp breaker do you use on a stove dryer and hot water heater?
For a stove, use a 8 or 6 gauge wire with a 40 to 50 amp breaker. For a dryer, use a 10 or 8 gauge wire with a 30 amp breaker. For a hot water heater, use a 10 or 8 gauge wire with a 30 or 40 amp breaker. Be sure to consult local electrical codes and guidelines for specific requirements.
Can you use 10 gauge wire to connect a 2 15 amp outlets to a 30 amp breaker?
No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.
Can you use 12 gauge wire with 600 volt capacity to hook up an 300 amp 220 volt dryer?
No, a 12 gauge wire is not sufficient to handle a 300 amp load for a dryer. You would need a wire with a much higher ampacity rating, likely in the range of 2/0 or 3/0 gauge wire to safely handle that current. It is important to always match the wire size to the amperage of the appliance to ensure safety.
Can you use a 20 amp circuit breaker for an electric dryer?
If you are referring to a cloths dryer, the answer depends on the requirements of the dryer. Most dryers require AWG#10 wire with a 30 amp fuse. If the wiring is AWG#12 then use a 20 amp breaker but never use it on AWG#10 which requires a 30 amp breaker. If you are referring to a hair dryer then yes a 20 amp breaker is fine.
What Size breaker for 6 gauge wire?
For 6 gauge wire, typically you would use a 60 amp breaker for larger appliances like a dryer or cooktop. However, always consult with a licensed electrician to ensure the proper breaker size for your specific application and local electrical code requirements.
