0
What change generally takes place when the length of the pulse width to an injection control pressure regulator (ICPR) is increased?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
The pressure of 250 kPa acting on 15 cubic meters of a gas at a temperature of 100 K is increased to 500 kPa and the volume is increased to 30 cubic meters?
Use the ideal gas equation to solve this. PV= nRT. You will have to convert your pressure to atmosphere to use the constant R = 0.0821 L*ATM/mol*K. You know your initial pressure, volume, and temperature. Moles can be neglected (n) because they will stay the same. You also know your final pressure and final volume, so you can solve for final temperature.
My house has half inch copper supply lines I added a bathroom on second floor and ran half inch plastic supply but pressure seems low Should I have ran three quarter supply to 2nd floor?
If the problem is that the water "PRESSURE" is low, The only to fix it is by raising the pressure by turning up the regulator or by adding A booster pump. If the pressure is fine but it takes A long time to fill A tub, Then yes you can increase the pipe size.
What are the signs that positive-pressure ventilation has been effective and may be discontinued?
The heart rate has increased to greater than 100 beats per minute, and the baby has sustained spontaneous breathing.
What gas law applies to the bends?
Henry's law is one of the gas laws, stating that the amount a gas dissolves in a given type and volume of liquid is proportional to the partial pressure of that gas. As pressure builds, more nitrogen and oxygen gets absorbed by the blood in the body, and it tends to get absorbed faster than it gets released, meaning that when you resurface and the pressure declines, the gas in the blood is still increased.
How is separation point of aerofoil related to the form drag?
As we know the dynamic pressure over the wing is already weakened by the Skin friction drag, a further decrease in dynamic pressure ( e.g. due to adverse pressure gradient ) will cause the dynamic pressure to be lose further and a rise in static pressure. The loss of dynamic pressure will result in turbulent airflow over the wing to be increased and therefore the separation point to move forward. This will enhance the pressure difference between leading and trailing edge and therefore a more increase in Form Drag. So , further ahead the separation point towards leading edge, greater the Form drag.By , Karun :-)At your service ,have any doubts , let know at ,aviator161989@gmail.com
Where is the fuel injection pressure regulator located on a 03 f350?
The fuel injector pressure regulator is located in the injector fuel pump. Most pressure regulators cannot be separated from the fuel injector pump.
If you are getting gas to the fuel injection but not out of the return line what could be the problem?
Fuel pressure regulator.
Where is the fuel injection sensor on your 1998 kia sportage?
there is no fuel injection sensor, you have a fuel pressure regulator and injectors that are controled to fire by the computer.
4.3 fuel pressure regulator?
Inside the upper intake manifold, attached to the fuel injection spider.
Where is the fuel pressure regulator located on a 2000 Dodge 3500 Diesel?
It is inside the injection pump and is not serviceable.
Where is the fuel pressure regulator on 4.3 V6 with central multi-port fuel injection?
It is under the intake manifold.
WHERE IS THE FUEL PRESSURE REGULATER AT ON A 2001 GMC JIMMY?
The fuel pressure regulator is located under the upper intake manifold and is attached to the injection "spider". The upper intake manifold must be removed to gain access to the regulator.
Where is the fuel pressure regulator on a 1996 Chevy Monte Carlo LS?
Its on the right hand side of the motor on the injection rail
Where is location of fuel injection pressure regulator in 2002 Toyota corolla?
Inside gas tank it is mounted on the pump asssembly
Where is the fuel pressure regulator located on a 1996 s10 blazer 4.3 vortex?
If you have the central injection system, you regulator is inside the plenum, next to the spider assembly. Takes about 20 minutes to get to it.
What causes sputtering on a 92 caravan during excelleration and during crusing at any speed?
fuel pressure regulator or the injection of the fuel
Where is the fuel pressure regulator on a 96 Chevy 4.3 vortec?
depends on the type of fuel injection on the motor... on the CSEFI injector assembly the regulator is located under the air intake plenum on the back of the fuel meter body. If it's TBI, the fuel pressure regulator is located inside the throttle body.
