If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw.
If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
Streak is the color of powder of a mineral on a porcelain plate.
Does it have a name plate or instructions on how to wire it? the wire that you pulled black,red or red ,blue goes to one of the fixture leads and the other color to the remaining fixture lead. green to green for your grounding conductor. As always if you are unsure consult a qualified person in order to be safe!
it doesnt change its color
A light fixture will function normally either way. The hot and neutral wires are interchangeable. DANGER! This is only true of lighting fixtures!
no, the color of the fur doesnt affect the color of the tongue
If these are all the wires you have then this would be a great assumption. It assumes also that everything before the fixture is wired correctly and with commonly used color schemes.
pink
hematite
The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral
It depends on the colors they carry/colors behind them in the pedigree. If the black is homozygous he will only throw black. But if he is is a black from a harl breeding it depends in the colors in the harl breeding. If he is a black from a blue breeding he could produce more blue (porcelain/blue mantles) amongst the other harl colors. If he's a black/fawn he could produce fawnequins if the porcelain carries for fawn. It's alot deeper than just the 2 dogs you see.
Which mineral leaves a green-black powder when rubbed against an unglazed porcelain plate?
Different minerals produce different colour powders (know as the mineral's 'streak') when scratched. For instance, hematite has a red streak, calcite has a white streak and graphite has a black streak. There is also variation within some minerals, depending on impurities. It should be noted that some minerals are too hard to be scratched by porcelain, and will instead powder the porcelain, producing a misleading white streak.
No. Unlike real teeth, porcelain bridges have the color baked in, and the whitening agents have no effect on them.
Streak is the color of powder of a mineral on a porcelain plate.
streak
Does it have a name plate or instructions on how to wire it? the wire that you pulled black,red or red ,blue goes to one of the fixture leads and the other color to the remaining fixture lead. green to green for your grounding conductor. As always if you are unsure consult a qualified person in order to be safe!
The rock used to find a mineral's streak color is unglazed porcelain.