0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many square feet is 1 square metre?
1 mtr = 100 cm 2.54 cm = 1 inch 12 inch = 1 ft. so, 1 mtr = 100/2.54 inch = 100/(2.54*12) ft. 1 mtr = 3.28 ft. so 1 sq. mtr = (3.28) ^ 2 sq. ft. = 10.76 sq. ft.
5.2 meters equals how many feet?
1 mtr = 3.28 feet, therefore 5.2 mtr = (5.2 * 3.28) feet = 17.056 feet Direct Conversion Formula 2 m* 1 ft 0.3048 m = 6.56167979 ft
How far is 10 Km?
About 2 hours walk 10,000 mtr 10936.133 yds 32808.399 ft 6.2137 miles
Want to know 100x100 x 8mm thk ms angle weight per meter?
Weight of MS Angle = (2*W-T)*T*L*7840 kg (All units are in MKS) Where, S = Width of any side in mtr T = Thickness of the angle in mtr. L = Length of the angle in mtr. 7840 is the density of MS in kg / m3. w=(2*.1-.008)*.008*1*7840 =(.2-.008)*62.72 =(.192)*62.72 =12.04 kg/mr
If it takes 500 feet to of fencing to enclose a rectangular lot that is 104feet wide then how deep is the lot?
The perimeter of a rectangle is 2*(width + depth) So 500 = 2*(104 + depth) 250 = 104 + depth depth = 146 feet
How much concrete is needed for a 10x28 patio?
One yard of concrete will cover approximately 90 square feet at a depth of 3-1/2". At an even 3-1/2", you will need just over 3 yards. This does not allow for any footings, turndowns, or a thicker slab.
How many square feet is 1 square metre?
1 mtr = 100 cm 2.54 cm = 1 inch 12 inch = 1 ft. so, 1 mtr = 100/2.54 inch = 100/(2.54*12) ft. 1 mtr = 3.28 ft. so 1 sq. mtr = (3.28) ^ 2 sq. ft. = 10.76 sq. ft.
How many mm in 1 sq mtr?
'mm' millimetres is a measure of length. 1 sq. mtr' is a measure of area. However, there are 1000 mm in 1 metre. So in 1 m^2 there are 1000mm X 1000 mm = 1,000,000 mm^2
5.2 meters equals how many feet?
1 mtr = 3.28 feet, therefore 5.2 mtr = (5.2 * 3.28) feet = 17.056 feet Direct Conversion Formula 2 m* 1 ft 0.3048 m = 6.56167979 ft
How far is 10 Km?
About 2 hours walk 10,000 mtr 10936.133 yds 32808.399 ft 6.2137 miles
Want to know 100x100 x 8mm thk ms angle weight per meter?
Weight of MS Angle = (2*W-T)*T*L*7840 kg (All units are in MKS) Where, S = Width of any side in mtr T = Thickness of the angle in mtr. L = Length of the angle in mtr. 7840 is the density of MS in kg / m3. w=(2*.1-.008)*.008*1*7840 =(.2-.008)*62.72 =(.192)*62.72 =12.04 kg/mr
What is the possible movement at the elbow joint?
flexion and extension
How do you calculate surface area of a duct?
Dimension is : W * D* L IN MTR AREA SQ.MTR= (W+D) * 2 * L
What wind measurement is considered smooth water with small waves?
Small waves, up to 0.1 mtr are present in a force 2 wind.
How deep should the footings be for a totem pole in relation to its height?
The usual formula is this; for every foot above ground you put 1/2 foot in the ground.
What water depth does a puffer fish live in?
Depth of 1.5-2 m
What correct compression depth for CPR for adult?
The proper compression depth on an adult is 2 inches.
