I would use a graduated jug, as shown in picture
You would use millimeters for the measure of the capacity of a paper cup.
why is a cup for measuring food ,different for a cup on the side of a water bottle, i thought that a cup is always 8oz
The boiling point of water is 100 degrees. However, the point at which paper burns is much higher than 100 degrees. When you boil water in a paper cup, all of the heat is transferred to the water, not the cup. When the water starts to boil, the paper stays unburnt. After the water has boiled through, there should be a small black mark on the base of the cup which can be easily removed.
no
-- Take a measuring cup and a paper cup. -- Using the measuring cup, pour about 3.7 fluid ounces of water into the paper cup. -- The weight of the paper cup in your hand is now about 1 newton.
A centilitre, probably.
the paper cup cannot become appreciably hotter than the water it contains
Plastic is an insulator. but most of the paper is not insulated, because the paper in general contains water, although the content is very low, but enough to pass current, but there also is a special insulation paper, that is on the special purpose. so in dry conditions, and the cup has no water, a plastic cup is a better insulator than a paper cup.
A cup of water is 8 ounces. So .75 cup is 6 ounces of water. Or use a 3/4 cup measure.
cc
If you fill your tub with water, then, crush a small peice of paper and tape it to the bottom inside of the cup. Slowly, put the cup in the water and you should see that the cup has no water in it and the paper is dry. unless you dip the cup in the water and scoop it up, but you arent supposed to do that.
With a liquid measuring cup