0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What would 15000 pounds per square inch equal in foot pounds for torque?
To convert in. lbs. to ft. lbs. you just simply multiply the in. lbs. by 0.08333 to get ft. lbs. 15000 in. lbs. x 0.08333 = 1249.95 ft. lbs.
1600 in-pounds in ft-pounds?
133.3333333333333333 ft lbs
How do you Convert lbs ft to in lbs?
1 lb foot = 12 inch lbs......Seriously.
What is the cubic ft of a 48ft trailer?
48 foot trailer: 3000 cu. ft. or 30,000 lbs 53 foot trailer: 3400 cu. ft. or 34,000 lbs.
Do 37 ft equal to 435 inches?
no 37 ft is equal to 444 inches
How many ft lbs in 120 degrees?
how many ft lbs in 120 degrees
How many ft lbs is 50 inch lbs?
12 inch lbs equal 1 ft lb.
What is torque specs for 5.7 gm rod bolts?
If it is a 1999 through 2002 , FIRST step is 15 FT. LBS then turn an additional 60 degrees. If it is the second design FIRST step is 15 FT. LBS. Then turn additional 75 degrees. If it is older then 1999 it will be 45 FT. LBS. If it is a 1991 model then it is 45 FT. LBS. ( 20 plus 60-degrees additional rotation)
What would 15000 pounds per square inch equal in foot pounds for torque?
To convert in. lbs. to ft. lbs. you just simply multiply the in. lbs. by 0.08333 to get ft. lbs. 15000 in. lbs. x 0.08333 = 1249.95 ft. lbs.
What is the Head to block torqe seqence 1.9 sohc?
22 ft lbs then 33 ft lbs then 90 degrees for final torque
If 300 pounds equals 27 sq ft how many pounds equal 3000 sq ft?
300 lbs/27 sq ft x 3000 sq ft = 900,000 sq ft lbs/27 sq ft = 33,333 lbs
What is the head torque spec on a 1995 Chevy Camaro?
V8 5.7 L,- 65 ft lbs, V6 3800,- 37 ft lbs, then additional 130 degrees, then center 4 bolts additional 30 degrees. V6 3.4 L,- 41 ft lbs, then additional 90 degrees (1/4 turn)
How do you convert 90 degree angle in to ft lbs?
You don't, 90 degrees will always be measure in degrees
What is the 95 blazer cylinder head torque specs?
Tighten all bolts first pass to 22 ft lbs Then long bolts 75 degrees Medium bolts 65 degrees Short bolts 55 degrees You can also do them this way. First pass 26 ft lbs Second pass 44 ft lbs Final pass 66 ft lbs The first method is the factory recommended but both will work fine.
What is the headbolt torque for a 1995 Chrysler 3.3 engine?
These are the steps. 45ft lbs, 65 ft lbs, 65ft lbs, 90 degrees turn.
What is the timing degrees for a jetta 90 engine 1.8?
60 - 75 ft lbs.
What is the torque specs for a 96 Chevy s-10 2.2L?
Camshaft sprocket bolt 96 ft lbs crankshaft pulley bolt 37 ft lbs crankshaft pulley/hub to crankshaft bolt 77 ft lbs cylinder head bolts step 1 long bolts 46 ft lbs short bolts 43 ft lbs step 3 tighten all bolts an additional 90 degrees intake manifold 24 ft lbs oil pump bolt 32 ft lbs rocker arm studs 37 ft lbs
