answersLogoWhite

0


Best Answer

An E-11 indicates it has a mini candelabra base bulb. I am not familiar with any d11s.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does d11s mean on the base of a light bulb?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

What does Edisons light bulb was an energy converter mean?

It means that a light bulb converts one type of energy to a different type of energy.


Whose work led to widespread use of electric or incadescent lights?

Amara Doser


When was the eletric light bulb invented?

It depends what you mean by "lightbulb"; Sir Humphrey Davy demonstrated the first electric filement light in 1802, the first practical lighting system - including the bulb, was developed by Edison around 1880, but many other people were demonstrating light bulbs around that time. Edison deserves the credit for creating an entire system for generating and distributing electricity - without that, the lightbulb would be pretty useless.


What happens when a light bulb is unscrewed in a series circuit?

All other light bulbs will turn off due to the series circuit being broken. The electrons cannot travel all the way through, hence the current will also not flow in the circuit, switching off all the other bulbs too.CommentIt's worth pointing out that the full supply voltage will then appear across the lamp holder -so take care!


How do you replace a fan's light bulb?

It depends on the type of fan, whether it is a range hood, bathroom fan, or room ceiling fan. There are several ways they are mounted as explained below. Preferably the power to the fixture in question should be off. 1. If there are thumb screws near the cover (mainly on range hoods and some light only ceiling fixtures), you would remove them. Then you would unscrew the old bulb and screw in the new one. Then you would put the thumb screws back in. 2. This may be just for a light-only fixture, but if the fixture is recessed and the cover is almost completely flush with the ceiling, you would pry it from the ceiling. Then you would replace the bulb. Getting the reataining springs back in may be tricky, and you would need to protect your eyes from debris up in the ceiling. 3. With most bathroom fans that use a square acrylic light cover, you would press into each side and pull it loose. Then you would replace the bulb and snap the cover back on. 4. If you mean a standard ceiling fan, it depends. For most, you would simply unscrew the old bulb and screw a new one in. For others, there are retaining screws holding the globe on, and for a few, the globe unscrews. 5. For a few ceiling fans, you don't replace the bulb, but replace the entire lamp kit. To do that, you remove the 3 screws from the plate above the light kit to drop it down, then disconnect the wiring (cap off the wires from the fan until you are finished), remove the light kit from the plate by loosening the nut. Then follow the instructions with the new light kit and undo the previous steps to reassemble the lower part of the fan with the new light kit.

Related questions

Thomas Edison invension of a light bulb?

What do you mean like did he invent the light bulb because if you do mean that then yes he did invent the light bulb


What does the prefix b10 mean on a light bulb?

The prefix "B10" refers to the bulb shape. In this case, it indicates that the light bulb has a bullet-shaped design. This type of bulb is commonly used in chandeliers and decorative lighting fixtures.


Vw Jetta warning light of light bulb with exclamation mark in the middle of the bulb What does this mean?

Burned out exterior bulb


What does the brake bulb light mean on a 2004 Honda Pilot?

The "BRAKE BULB" light means that a brake bulb is not working and may require replacing.


What does the exclamation light mean on the dashboard?

You probably have a light bulb burn.


On a Volvo 850 Wagon what does the indicator light with the light bulb w an exclamation point mean?

it means that a bulb is burned out


How can you power a light bull?

== == well first what is a light bull do you mean a light bulb?


What does 40W mean on a light bulb?

It means that the power consumption of the bulb is 40 watts.


Could batteries light a light bulb?

Yes, even a potato can light a light bulb. Yes. If the batteries match the voltage of the bulb, they can light it. Flashlights have bulbs and batteries that power them. If you mean a household light bulb, then you'd need many batteries in series (80 of the 1.5 volt batteries).


What does the light bulb on the dashboard of a Mercedes c280 mean?

the light bulb on you dashboard means you have and exterior light out if it isn't you headlights blinkers....ect its probably just a short


Why did the breaker blow when I changed the light bulb?

Breakers don't blow, they trip. Do you mean a fuse? If you are talking about a breaker, you can reset it. Wether it was a breaker tripping or a fuse blowing from installing a new bulb, if the light switch was on when you installed the bulb you got an initial surge from the immediate completion of the circuit. The only thing to be cautious about is a possible fault in the light bulb base. See if the new bulb lasts or if it burns out quickly, you might have a short in the light fixture which needs to be addressed because it could be a fire/electrical hazard. -- If the bulb is a "bayonet cap" bulb there are two contact pads on the base of the bulb and two barbs protruding from the sides. When the bulb is first inserted, before twisting to lock, the bulb contact pads can bridge the live contacts on some light fittings and short the circuit, causing the breaker to trip. Always turn the light switch off when changing a bulb (usually the up position). If you are not sure where "off" is then turn the light circuit off at the breaker and use a table lamp for ambient light.


How can a tomato light a light bulb?

i think you mean potato... You can from a potato or super tomato