Total Waste Of Time
'Mull Set' . I think you mean 'NULL SET'. This means a set with no elements, or an empty set.
The mean tells the sum of the whole set of data.h
Mean is the same as average. To get the mean of a set of numbers: First, you add up all the numbers. Second, you divide by the number of numbers in the set. Total of all the numbers/Number of numbers in the set
You are finding the mean of the set of numbers.
If the pool is really dirty then it is best to set the filter to waste.
Should be set to Filter in normal circumstances, if particularly soiled, set to waste to save excessive dirt in filter.
Do you mean how do you install a sand filter?.
No, not if the filter is set to backwash or waste.
Set your filter to Backwash or Waste, but don't leave it. Empty out what you do not want and return filter to Filtration
No, mitochondria do not filter waste. Mitochondria create energy for the cell.
No, mitochondria do not filter waste. Mitochondria create energy for the cell.
When you use flock you should not put it through the filter.When vacuming flock out of a pool with a sand filter you vacuum to waste. However you don't have that luxury with a cartridge filter. The ideal solution would be to put a 3 way valve between the pump and the filter and set it up so that one of the ports can be run to waste while at the same time shutting of the water to the filter.
The "Rinse" will also take water out, but you should really have a waste setting. Call a local pool company or the maker of your filter system.
The will be a stamped or labeled word on the base of the filter close to the port the will be your waste port.
I use the bagged, blue roller-ring vacuum that uses a hose into the skimmer drain with a reverse suction--and at least with my system and pump/filter, I set the filter to WASTE--it bypasses the DE filters. There's lots of lost waste water, moreso than even backwashing, so I do it sparingly. Leave your filter on the setting "Filter",when you go to vacuum your pool, you need to shut the your pump off,via the timer, there will be a handle where either next to the pump or next to the filter where you will see on the PVC pipes marked "skimmer" and "main drain" or "pool drain" turn the handle towards the main drain or pool drain and this will shut off your drain at the bottom of the pool, thus creating more suction in your skimmer which makes it easier to vacuum your pool out! ** First ans. not a very good explaination by an inexperienced homeowner... Second ans. hum..... how are you going to vac the pool with the pump off? You did not tell us to trun on the pump again once you "hooked" things up. Both are a waste of water. Not all pools are set up explaining or identifying pipes or valve and what they control. Leave the back wash valve or sometimes called the rotor valve in the "filter" position because what you are going to vac is minor stuff not debris. You want the filter to filter out the dirt before returning it to the pool. Once you have vaced the pool then determine if you need to back wash the filter and do so if needed or wait until the gage on the filter tells you that the filter is getting dirty with higher readings on the gage.
Because your Kidneys filter waste out of your blood. The waste is then carried to the bladder and expelled from the body as urine.