0
What else can I help you with?
What gauge wire do you need for 1800 watt amp and 2 550 watt subs?
4 gauge
Will a 800 watt and 1200 watt amp blow out a 1400 watt sub?
Yes!!!!! Do not try it unless you want to get to very hurt!!!!!!!!
Will an amp of 1400-watt with 700-watt rms blow a sub with 1100-watt peak and 600-watt rms?
nope your powering it just right
Will a 120 volt circuit carrying a 2200 watt load blow a 15 amp fuse?
It will draw over 18 amps and will blow a 15 amp fuse.
Will 760 watt 2 channel amp power two 300 watt sub woofers?
Yes, but the amp is too powerful and if turned up to full volume will blow the speakers.
Can a 800 watt amplifier push two 1052 watt subwoofers?
Yes the amp can push the 2 subs. I have 2 1250 watt 12inch subs and 1 maybe 400 or 500 watt amp and the amp does fine but if you want more bass at lower levels of volume then you want to have a bigger amp. Just make sure your amp doesnt blow your subs.
Can a 200 watt amp power a 250 watt rms sub?
YES! it won't reach it's peak, but that's also probably a good thing, cause it'll be harder to blow your sub. i prefer to buy either the exact watt match for my subs and amp, or buy the next lower watt amp from my subs
What would happen if you connected a 12 volt light to a 2000 watt amp?
You'd blow out the light.
Can a 250 watt amp push 1300 watt subs?
In most cases, the speakers should be able to handle more watts than the amp can deliver. Doing it the other way around will blow out the speakers.
Im worried that i might blow out my 500 watt amp because i have two 12 1000 watt subs and two more 10 subs then four other speakers in my car will i be all right?
no you wont get a 5000 watt amp and u will be fine
Will a 5000 watt amp wiring kit work well on a 1600 watt amp?
Yes I do not see why not as long as the in line fuse does not exceed the power the amp is pulling. You want the fuse to blow instead of the amp so you need a fuse that can only handle 1600 watts or the equivalent to....
1200 watt wiring kit suitable for a 800 watt amp and 1100 watt sub not sure whether this would have a effect on the cables?
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
