0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the maximum frequency output can get from 555?
3MHz
What is design capacity?
maximum obtainable output
What is the maximum power output of a class 2 power supply?
The maximum power of a class 2 power can be between 40-50v. You should always make sure you are aware what is the maximum output for your electronics.
Difference between natural frequency and resonance frequency?
In natural frequencies the output of the system will be less than the maximum level. In the resonance frequency the output of the system will be the maximum level.
Maximum rate of output that a production facility can produce?
capacity
What is output voltage on pin1 of UM66?
According to the datasheet the output on pin 1 of that transistor is a maximum 4.5 volts
Effective capacity is the maximum theoretical output of a stemming a given period under ideal conditions?
Effective capacity is the maximum theoretical output of a stemming a given period under ideal conditions.
Why line is drawn at 0.707 AV or 3dB to find bandwidth?
The bandwidth of a circuit, amplifier etc has been chosen to be defined by the points when the power output falls to half its maximum. Log 0.5 is -0.3 which in the decibel notation is -3dB (-0.3 Bels= -3 decibels). When the output power is at 0.5 maximum, then since the power varies as the square of the voltage, the output voltage is 0.707 of the maximum output voltage.
How maximum output power obtained?
when all the resistance removed from the circuit
What is the Maximum output of solar cell in voltage?
i beleve it is 12 volts
In which circuit will the light bulb be the brightest?
the circuit which has the maximum power output
Why clipping happen for op-amp?
Clipping occurs in the voltage waveform when the input voltage, multiplied by the voltage gain of the op-amp circuit, exceeds the op-amp supply voltage as limited by the output network. The supply voltage and output network, limits the maximum voltage that can be achieved at the output. The op-amp behaves normally within its range of maximum voltage output, and then it is clipped when it reaches the maximum voltage of the circuit.
