MONEL alloy 400 is readily joined by conventional
processes and procedures. Most of the conventional welding processes may be
used to join MONEL alloy 400 to itself or dissimilar alloys.
The choice of welding product is dependent upon the
materials being joined and the environment to which they
will be exposed.
For shielded metal arc welding (SMAW), MONEL
Welding Electrode 190 is used to deposit near-matching
composition weldments. For some applications, Nickel
Welding Electrode 141, INCO-WELD A Welding Electrode,
or INCONEL Welding Electrode 112 may be preferred.
Properties of weldments deposited with MONEL Welding
Electrode 190 between two sections of MONEL alloy 400
plate and between sections of alloy 400 and carbon steel
plate are shown in Tables 20 and 21.
For gas tungsten arc welding (GTAW) and gas metal arc
welding (GMAW), MONEL Filler Metal 60 is used to
deposit near-matching composition weldments. For some
applications, Nickel Filler Metal 61 or INCONEL Filler
Metal 625 may be preferred. These same filler metals may
be used for submerged arc welding (SAW). INCOFLUX 5
is used with MONEL Filler Metal 60. INCOFLUX 6 is used
with Nickel Filler Metal 61. INCONEL Filler Metal 625 is
used with INCOFLUX 7.
You would use 316 as the filler, it is the more pertinent metal of the two.
MONEL alloy 400 is readily joined by conventional processes and procedures. Most of the conventional welding processes may be used to join MONEL alloy 400 to itself or dissimilar alloys. The choice of welding product is dependent upon the materials being joined and the environment to which they will be exposed. For shielded metal arc welding (SMAW), MONEL Welding Electrode 190 is used to deposit near-matching composition weldments. For some applications, Nickel Welding Electrode 141, INCO-WELD A Welding Electrode, or INCONEL Welding Electrode 112 may be preferred. Properties of weldments deposited with MONEL Welding Electrode 190 between two sections of MONEL alloy 400 plate and between sections of alloy 400 and carbon steel plate are shown in Tables 20 and 21. For gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW), MONEL Filler Metal 60 is used to deposit near-matching composition weldments. For some applications, Nickel Filler Metal 61 or INCONEL Filler Metal 625 may be preferred. These same filler metals may be used for submerged arc welding (SAW). INCOFLUX 5 is used with MONEL Filler Metal 60. INCOFLUX 6 is used with Nickel Filler Metal 61. INCONEL Filler Metal 625 is used with INCOFLUX 7.
inconel
a few ways the easiest way is to braze it assuming you want it to be the cheepest and most reliable, all you wil need are OAW tools like oxygen and either acetalyene, propane or natural gas. Make sure to use a correct OAW welding tip like a 0 more surface area less heat
It is a weld made by melting the edges of the materials to be joined, but adding no filler metal to the weld.
A heterogeneous weld corresponds to a weld that is realized with a different filler alloy than the base metal. At the opposite, a homogeneous weld is realized with same filler alloy than the base metal. Finally, an autogenous weld is done without filler alloy. The joining is realized by melting only the base metal. A.B.
The crown of the weld is the material of the filler metal that projects above the surface of the parts being joined by the weld.
Monel Alloy 400 is readily joined by conventional process and procedures, Most of conventional welding process may be used to Join Monel Alloy 400 tto itself or disimilar alloys.
You can use the 308 or 316.
Filler rods are used to add metal to a molten weld pool during the welding process and electrodes actually have electricity running through them to deposit metal into the weld with the exception of TIG welding where the tungsten electrode is used solely for heat.... Hope this was helpful
A form of arc welding in which the electrical energy used to weld the metal is conducted through a wire that is fed from a spool to act as a filler metal.
while doing the welding ,the weld metal should be deposit in the weld pool of parent material and electrode.In some type of welding like TIG ,the electode is not consumable ,it is used to create arc betwenn the electode and the parent material.In such cases,the filler metal or wire is used to join the parent material