number six wire is good for sixty amps max Added by maintain... First, I am assuming that you are not an electrician. Second, I would suggest that you check with your local building official, it sounds like you may need a permit. Third, #6 THHN conductors will work under optimal conditions. However, there may need to be some deration factors applied. THHN may not work if the conductors are exposed to light, are installed in wet locations or other situations. It is best to check with a qualified electrician or local building official before you invest time and money on a project that will not work the way you want. Best of luck! Terry
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
Get a new gage cluster panel.
The fuse for the instrument panel on a 1994 Altima is the second one up from the bottom on the left row of fuses it says electronic parts and it controls the tachometer, temp gage, fuel gage and the overdrive. It is a 10 amp fuse.
i am gage brody and i just came out of the closet
Oil pressure sending unit.
I would run 1/0 gauge.
19 gage is thicker n 22 gage is thinner.
my name is Gage = me llamo Gage
an ultrasonic gage reads the thickness of a test piece by very precisely timing echoes. In order to turn these time measurements into thickness measurements, the gage must be programmed with the speed of sound in the test material as well as any necessary zero offset that is required by the instrument, transducer type, or echo shape. This process is commonly referred to as gage calibration.
Gage
what is a rain gage
One can purchase a thread gage from the following stores: Amazon, The Gage Store, Ring Plug Thread Gages, Grainger, Deltronic, Ideal Gage, eBay, Vermont Gage, Gage Maker, GS Gage, to name a few.