0
What else can I help you with?
What is the greatest possible error of 1.20m?
The greatest possible error is 0.005
What is the greatest possible error of 0.991g?
The greatest possible error is 0.0005
How do you find the greatest possible error for 19.2?
what is the greatest possible error of 350mi
Find the percentage error in rounding 3.452 to 3.5?
Percentage Error is: ~1.4% (1.39049826188%)
What is the greatest possible error for 750?
If the numbers are rounded to the nearest 750, then 375 is the greatest possible error. Although you are not likely to have counted in 750s, it is quite possible that you counted in 50s (greatest error = 25). Or in tens (GE = 5) or in units (ones), when the greatest error is 0.5. The greatest possible error is half of the smallest unit of measurement.
How do you calculate percentage error for equipment?
Look on the equipment for where it says the plus or minus figure for accuracy (for a burette it is usually + and _ 0.1cm3) divide this by the amount you measured , times 100 to make it a percentage. ---- ---- Percentage Error = Maximum Error / Measured Value X 100 For example.Maximum Error for the following apparatus are:Balance = +/- 0.01Pippette = +/- 0.1 And the Measured value for each are:Balance = 0.15Pippette = 25 Then...the percentage error is:Balance percentage error = 0.01 / 0.15 X 100 = 66.66%Pippette percentage error = 0.1 / 25 X 100 = 0.3% You can now also work out your maximum total error.Maximum total Percentage error = Balance Percentage error + Pippette Percentage errorMaximum total percentage error = 66.66 + 0.4 = 67.06%
What is the greatest possible error for 8.64?
Assuming that the measurement is to the nearest 0.01, the greatest possible error is 0.005.
What is error and percentage error?
Percentage error measures the error in relation to the quantity measured. For example if something weighs 100 grams with a possible error of plus or minus 5 grams, this is an error of 5%
If a measurement is small is the percentage error high?
yes, it is. The smaller the measurement, the higher the percentage error.
What is the percentage error of 12m?
what is the percent error of 12m
When an error of 1 percent is made in the length of a square the percentage error in the area of square will be?
The percentage error in the area of the square will be twice the percentage error in the length of the square. This is because the error in the length affects both the length and width of the square, resulting in a compounded effect on the area. Therefore, if there is a 1 percent error in the length, the percentage error in the area would be 2 percent.
What does a negative percentage error means?
A percentage error is 100*(measurement - true value)/true valueThe percentage error is negative if the measured (or calculated) value is smaller that the true value.
