0
Typically the old work box would go to just off the stud to either side. I can't think of a reason that dimension would be critical, and you should have no problem putting it on either side.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you install electric box in drywall?
More to the point is how are YOU going to get wire to and from the box. Installing the box is the easy part. You first find a stud and measure the box dimensions onto it with one side almost touching the stud. Now, using a 'Keyhole' saw or drywall saw, cut out the box shape. At this point, I insert a 'fish' tape and pull the wire through, usually from the top. I pull the wire out enough to feed into the box and then push the box into the cut shape. Then screw the box into the stud obliquely, or if you've got an 'old work' box, turn the screws on the box to fix the 'ears' and secure the box. Now you can wire the outlet or switch in. -Turn off power first .
Is it a violation to use drywall screws to install a new construction box to a stud inside the box?
If you have wood studs I know of no code restrictions. I think sheet rock screws make good wood screws for many different applications. If you have metal studs, the screws won't hold the box solidly to the stud. This may be a violation; I didn't look it up; but many things are done in a pinch. If this is your situation, connect the box to the stud as best you can. Then, once sheet rock is added and your device and faceplate, there won't be a problem because it all goes together to make an adequate installation. I am NOT saying the box can be free-floating. It should be held more or less in place with the screws. If it is free-floating then you are depending on the faceplate to hold the box and device in place. This is a violation of code.
Can you box in an electrical panel in an open room?
That depends on what you mean by "box in". You must always provide access to an electrical panel.
Do you need clearance in front of a curcit breaker panel box?
Yes you do. The circuit breaker box must be accessible without moving or lifting any objects. A three-foot clearance should be maintained around the box. The box door should be able to open to a 90 degree angle without obstacles. The height of the ceiling should be at least 6 feet. There must be a light in the area.
How is an electrical outlet mounted into a wall?
== == If you're asking about the electrical socket outlet itself, usually two screws fix it into its wall outlet box.There are several ways to mount an electrical outlet box. Depending where you live, just go to your local Home Depot, B&Q, Homebase, Wickes or any similar hardware or DIY-supplies store and look around the section for electrical parts. If you're asking about the wall outlet box, usually 2 nails or screws fix it. If it's mounted into a hollow wall built using wooden wall studs and sheetrock/plasterboard, the nails or screws fix the box to the closest wall stud. If it's mounted into (or onto) a brick wall, the nails or screws fix the box to the brickwork.If not nailed or screwed to a wall stud in a hollow wall, an electrical outlet box can be held-in with a pair of "jiffy clips" or the box itself has flip-up ears that clamp it to the sheetrock/plasterboard. These types of boxes are known as "EZ-Boxes". As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed. If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any workANDalways use an electricians test meter having metal-tipped probes(not a simple proximity voltage indicator)to insure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
What could happen if electrical box -switch or plug- is not mounted to wood stud?
The box must be securely mounted. In some applications "Old Work" boxes are made to be secured by the sheetrock.
Where is the Friends Of Sanford Stud Farm in Amsterdam New York located?
The address of the Friends Of Sanford Stud Farm is: Po Box 106, Amsterdam, NY 12025-0668
Where is the cabin filter located on 2004 Nissan altima?
It is located behind the glove box. The glove box must be removed and you will see an access panel in the duct work. Remove this panel and you will see the filter.
Where is the Susquehanna River Archeological Center Of Native Indian Stud in Sayre Pennsylvania located?
The address of the Susquehanna River Archeological Center Of Native Indian Stud is: Po Box 12, Sayre, PA 18840-0012
How do you install electric box in drywall?
More to the point is how are YOU going to get wire to and from the box. Installing the box is the easy part. You first find a stud and measure the box dimensions onto it with one side almost touching the stud. Now, using a 'Keyhole' saw or drywall saw, cut out the box shape. At this point, I insert a 'fish' tape and pull the wire through, usually from the top. I pull the wire out enough to feed into the box and then push the box into the cut shape. Then screw the box into the stud obliquely, or if you've got an 'old work' box, turn the screws on the box to fix the 'ears' and secure the box. Now you can wire the outlet or switch in. -Turn off power first .
Where is the fuse box located on a 1974 VW Beetle?
The fuse box on a 1974 VW Beetle is located in the dash on the driver's side. The driver's side door must be open to access the fuse box which is located in a panel just to the left of where the driver's foot controls are.
How do you get ghost stud option in Lego Harry Potter wii?
You have to find the correct red box, and then you'll be able to unlock the ghost stud option in Diagon Alley.
Where is the fuse box located in a 2003 Jeep Wrangler?
Access to the fuse panel is behind the glove box. The glove box must be removed in order to obtain full access.
Where is the pcm located on 2004 sebring?
In the passenger compartment behind the glove box. The glove box must be removed as well as the lower dash trim to get to it.
Where is the Vacuum control for the front axle on a 1989 S10 Tahoe 4X4 located?
It is on the passenger side of the car under the hood, mounted on the finder. It is under the battery box behind the Right headlight. The battery and the battery box must be removed to access it to work on it or replace it.
97 Chevy Tahoe steering gear box is loose?
Taking the play out of the gear box which way do I turn the stud after I loosen the bolt
How do you take off F50 studs without the stud key?
u need the stud key or try using the things u find in a tool box but it might damage ur shoes
