1 part per million, used to describe how many of one type of particle you will find amongst another type of particle
1PPM
Type your answer here... yes
Krypton is found in the air on Earth to the extent of about 1ppm
Yes
1 ppm HCl in aqueous solution would have a pH of around 6.
1 ppm is one part per million, or one millionth - percentage (which is latin for per hundred) wise, 1 ppm is .0001%
Use one ampule of calcium hypochlorite to 1/2 canteen cup of water. (The desired chlorine residual should be 1ppm)
Parts per million (ppm) is the same as mg/L. So, dissolve 5 mg of NaOH in 1 L of water and viola!
Krypton is a Noble gas. But it has two different main forms. It can be found in the Earth's atmosphere (about 1ppm) and also in Mars' (.3ppm). It's solid form is a type of crystal. It's gas is colorless and odorless.
1 gallon of 12% strength liquid chlorine will raise 120,000 gallons of water approximately 1ppm. For 10,000 gallons it takes about 9oz. to achieve 1ppm. PPM means parts per million not parts per moron. A 1-1.5ppm chlorine residual is usually sufficient to maintain a swimming pool as long as it is in a free and not combined form (chloromine). Public pools are closed down if the chlorine level exceeds 9ppm. 1 gallon of chlorine in a 10,000 gallon pool will exceed 14ppm. Use an oxidizer such as potassium monopersulfate to keep the chlorine in its free state and you won't turn your hair green (copper precipitates) or dissolve your children. If you're using calcium hypochlorite a quarter pound will raise 20,000 gallons to 1ppm. The practice of overdosing a pool with chlorine once a week is for lazy people that don't know chemistry or math. Chlorine is an oxidizer and can be harmful in large doses as it is easily absorbed through the skin. Take your choice.
1ppm is greater than 1ppb. Reason: ppm is mg/l and ppb is ug/l. And mg is always greater than ug. 1ng = 1000ug 1ug = 1000mg 1mg= 1000kg.... Hope this information helps. Regards, Nazia Farooqui Heriot Watt University, Scotland.
1ppm = 1mg/lso, 1000ppm = 1gm/l or 0.1gm/100ml that is your required.FW of NaCl = 58.5 (Na-23+Cl-35.5)58.5gm NaCl = 23gm NaXgm NaCl = 0.1gm Natherefor X = 0.2543gmSo dissolve 0.2543gm of NaCl to 100ml, to get 1000ppm of 100ml Na soln.